Rehau ABS edgebanding 315429-053 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut sheet goods present a uniform, project-ready edge. The edge banding design covers raw substrate, which helps create a continuous visual surface along cabinet sides, shelves, and casework. The 15/16 inch width referenced in the SAP description gives coverage over common 3/4 inch panels with a margin for trimming, supporting a flush edge after processing. The 1mm thickness from the description provides a solid edge profile that can be machined after application, useful when you want a defined edge line. The ABS material noted in the description gives a consistent, workable plastic edge that suits typical woodworking shop methods. The long-length roll reference of 600 feet in the description supports running multiple parts or full projects without frequent changeover, which can keep production moving.
The SAP description lists this Rehau ABS edgebanding at 15/16 inch width, which gives coverage across the face of common 3/4 inch woodworking panels plus some overhang for trimming. That extra margin supports a consistent flush finish after machining edges. The same description specifies a 1mm thickness, setting expectations for how prominent the edge profile will appear once applied and trimmed. This thickness works well when you want a noticeable but controlled band at the panel edge, aligning with many cabinet and casework standards. With these stated dimensions, you can plan trimming paths, edge profiles, and tooling passes to suit the material, helping maintain steady workflow on repeated parts.
The product is classified as edge banding within the edgebanding category, placing it in typical cabinet, furniture, and casework edge finishing tasks. Its ABS material noted in the SAP description suits edging on wood-based panels where you want a durable plastic band along cut edges. The 15/16 inch width from the description fits well with standard 3/4 inch panels used in many woodworking projects, allowing applications on cabinet sides, shelving, and partitions that share the same stock thickness. Because the roll length is listed at 600 feet, this edgebanding supports both shop production runs and larger one-off projects, limiting interruptions. In practice, these characteristics let you run multiple cabinets, closets, or storage units using the same edge treatment for consistent appearance.
The ABS material specified in the description provides a predictable plastic edge that responds well to the cutting and trimming methods used in woodworking shops, which helps maintain consistent results when processing multiple panels. The stated 1mm thickness gives a stable edge cross-section so trimming tools engage a known material thickness, aiding repeatable setup on edge trimmers. The 15/16 inch width listed in the SAP description offers enough overhang beyond panel thickness to accommodate slight panel or cut variations while still trimming down to a clean line, reducing rework from exposed substrate. The 600 foot length referenced in the description reduces roll changes, so once machines are dialed in for this particular edge banding, you can run longer without interruption, which helps keep setups consistent across a batch. The identification by manufacturer part number 315429-053 also supports returning to the same exact specification later, so replacement rolls match previous work on ongoing or repeat projects.
Rehau 315429-053 is ABS edge banding identified as Rehau ABS edgebanding, so it serves as edging material for finishing exposed panel and cabinet edges in woodworking projects.
The SAP description lists this ABS edge banding at 15/16 inch wide and 1mm thick, providing coverage over common 3/4 inch panels with extra material for trimming to a flush edge.
The SAP description specifies a 600 foot length, which supports extended runs of cabinets or casework using the same edge treatment without frequent roll changes.
The SAP description identifies this product as ABS, giving a plastic edging material that handles well with standard trimming and machining processes in woodworking shops.
The stated 1mm thickness provides a solid, defined edge profile that stands up to trimming passes and delivers a noticeable, uniform band along panel edges.
The 15/16 inch width gives coverage beyond 3/4 inch panels, offering enough overhang for trimming so finished cabinet and casework edges present a clean, continuous surface.
Rehau ABS edgebanding 315429-053, described at 15/16 inch wide, 1mm thick, and 600 feet long, provides a dimensioned ABS edge banding suited to cabinet and panel edge finishing. These stated measurements and material support trimmed, uniform edges across multiple parts. For projects matching these dimensions and material needs, this edge banding aligns with woodworking panel edging tasks.
Sold In: 1 Roll