Rehau ABS edgebanding 315429-059 is an ABS edge banding designed to finish exposed panel edges with a consistent profile along the full length. The 15/16 inch width covers typical panel thickness while giving a small overhang for trimming to a tight, flush edge. The 1mm thickness provides a solid edge that stands up to everyday use while still trimming cleanly with standard edgebanding equipment. The C600807 designation identifies the specific decorative match, so runs on the same job look uniform from piece to piece. The embossed lacquer finish adds a textured, coated surface on the edge, giving a finished look that visually ties into the face material. Supplied in a 600 foot length, this edgebanding supports longer production runs and repeat jobs without frequent material changeover.
The 15/16 inch width on this Rehau ABS edge banding gives technicians enough edge coverage to position the band accurately on panels before trimming, which helps maintain a consistent reveal along the cabinet or panel edge. The 1mm thickness works well with common ABS edgebanding setups, so feed pressure and trimming settings can be dialed in around this stable profile for repeatable passes. The embossed lacquer finish defines the surface characteristics the equipment will contact, which matters when setting pressure wheels and trimming heads for a smooth, mark-free edge. With a 600 foot length available on one coil, shops can set up the machine once and run a full batch of parts under the same settings, helping keep edges uniform across the order.
This Rehau ABS edgebanding, with its 15/16 inch width, is sized to cover typical panel edges while still allowing a small margin for post-trim cleanup, which supports tight joints on cabinet sides, shelves, or casework. The 1mm thickness gives a defined edge profile that holds up as panels are handled through machining, assembly, and installation. The C600807 embossed lacquer finish defines the specific visual appearance of the band, helping shops match this edge treatment across doors, drawer fronts, and carcass parts within the same project. Because the coil is supplied in a 600 foot length, it supports multi-cabinet or multi-room work from a single run, helping keep color and texture consistent when panels are cut, banded, and installed at different stages.
The 315429-059 manufacturer part number ties this ABS edge banding to a specific Rehau, Inc. product, so production planners can call out the exact band required for repeat jobs and service work. The ABS material and 1mm thickness give a known machining behavior, which supports consistent feed, heat, and trim adjustments across batches for predictable workflow. The C600807 embossed lacquer surface tells finishing and QC teams what edge appearance to expect, making it easier to align project standards when combining this edgebanding with matching decorative materials. The 600 foot coil length supports extended production without swapping materials, helping maintain line speed and keeping edge quality steady from the first part to the last part in the run.
Rehau ABS edgebanding 315429-059 is described as 15/16 x 1mm, giving a width sized for panel edges and a 1mm thickness that supports stable trimming and a defined edge profile.
This Rehau 315429-059 edge banding is ABS, identifying it as a thermoplastic edgebanding that aligns with equipment and settings commonly used for ABS materials in woodworking shops.
The C600807 embossed lacquer description indicates a specific decorative match with an embossed, lacquered surface, which defines the texture and appearance of the finished panel edge.
The 600 foot length allows long production runs on a single coil, supporting consistent setup and edge appearance across multiple cabinets or panels in the same job.
The Rehau, Inc. part number 315429-059 uniquely identifies this ABS edge banding, helping shops specify, reorder, or reference the exact product for ongoing or repeat work.
This ABS edgebanding for cabinetry, with its 15/16 x 1mm size and C600807 embossed lacquer finish, suits projects that require a defined, decorative edge on panels using ABS-capable edgebanding equipment.
The defined 15/16 x 1mm size, ABS material, and C600807 embossed lacquer finish make this Rehau 315429-059 edge banding a clear choice when a matching decorative edge is required on panel work. The 600 foot length supports extended production, while the specific manufacturer part number simplifies specifying the same product across initial builds and follow-up jobs. For shops standardizing on ABS edgebanding for cabinetry and casework, this coil aligns with equipment set up for 1mm ABS and helps deliver a uniform, finished edge across related projects.
Sold In: 1 Roll