Rehau ABS edgebanding 315431-059 15/16 x 1mm

Rehau ABS Edgebanding For Finished Panel Edges

Rehau ABS edgebanding provides an ABS edge banding option for covering and finishing exposed panel edges, giving casework and components a defined termination at the edge. The 15/16 inch width covers standard panel thicknesses with a small overhang, supporting trimming and clean alignment along cabinet and furniture edges. The 1mm thickness gives the banding a defined profile at the edge, creating a noticeable edge line that helps differentiate surfaces on doors, drawer fronts, and carcass parts. The ABS material identifies this edgebanding as a plastic edge solution, which supports use on laminate or similar panel constructions where a matching plastic edge is preferred. The 315431-059 designation ties this edgebanding to a specific Rehau, Inc. identification, helping buyers match this banding to existing jobs or drawings that reference the same code.

Key Edgebanding Details That Support Shop Work

• The ABS edge banding construction defines this as a plastic banding solution, supporting use on engineered wood or laminate components where a consistent plastic edge is required along production runs.
• The 15/16 inch width is sized to span typical substrate thickness with trimming allowance, helping installers run the banding and then trim back to a flush, straight edge along cabinet and fixture parts.
• The 1mm thickness gives the edge banding a solid presence at the edge, supporting a defined edge radius once trimmed so components present a consistent line around doors and panels.
• The 315431-059 manufacturer part number and CP41245 reference tie this banding to a repeatable specification, supporting reorders that match prior work when projects call out the same identifiers.
• The 600ft length notation describes an extended run capacity, letting shops plan longer edgebanding runs on casework or production batches without frequent changeovers.

Edgebanding Dimensions And Identification For Fit

The 15/16 inch width on this ABS edgebanding is sized to sit slightly proud of many panel edges, giving room for trimming tools to cut back to a flush surface along cabinet and furniture parts. The 1mm thickness sets the material profile, shaping how the finished edge looks and how it feels at the transition between face and edge on doors and panels. The ABS designation in the SAP description identifies the plastic composition, aligning this banding with applications that use similar plastic materials elsewhere in the project. The CP41245 and EMB LAC references in the SAP description further define this specific variation, giving shops a clear code to match when they need the same edge detail on repeat runs.

How This ABS Edgebanding Fits Real-World Projects

Where This Rehau ABS Edgebanding Is Typically Used

The Rehau ABS edgebanding, identified as 315431-059, is positioned as an edge banding product within the edgebanding category, so it serves to finish the raw edges of panels in cabinetry, furniture, or other wood-based assemblies. The ABS edge banding construction supports use wherever a plastic edge is preferred on panel-based casework, helping transition from the panel face to a defined edge. With a 15/16 inch width, this banding aligns well with applications using sheet goods near that thickness, providing coverage with extra material for precise trimming. The 1mm thickness allows the edge to present as a noticeable strip along doors and drawer fronts, tying the perimeter together visually. The 600ft length notation supports use on projects with multiple components, allowing long runs across many parts without frequent material changes.

Why The 15/16 x 1mm Format Supports Consistent Results

The combination of 15/16 inch width and 1mm thickness on this ABS edge banding shapes how consistently edges can be finished across a job. The extra width beyond nominal panel thickness supports cleaner trimming because there is enough material to overhang before flush-cutting back to the substrate edge. At the same time, the 1mm thickness offers a balance between a substantial edge appearance and manageable trimming, keeping the edge visually defined without dominating the face of the panel. The clearly defined 315431-059 manufacturer part number and RU315431-059 web reference allow shops to match ordering to drawings and records, which supports consistent material selection across phases of a project. The CP41245 and EMB LAC details in the SAP description further anchor this edgebanding as a specific variant, which matters when projects call for the same edge detail across multiple runs or locations.

Common Questions About Rehau ABS Edgebanding 315431-059

Select Rehau ABS Edgebanding 315431-059 For Defined Edges

Rehau ABS edgebanding 315431-059 combines ABS construction, a 15/16 inch width, and 1mm thickness to establish a clear specification for finishing panel edges. The defined dimensions and 600ft length support planning for cabinet, furniture, or millwork runs that require consistent edge treatment.