Rehau ABS edgebanding 315431-072 15/16 x 1mm

Rehau ABS Edgebanding 315431-072 For Clean Edges

Rehau ABS edgebanding 315431-072 is an ABS edge banding from Rehau, Inc. that is identified in the SAP description as 15/16 x 1mm ABS CP41242 EMB LAC 600FT, so it provides a defined 1mm thickness and 15/16 inch width for covering panel edges to that dimension. The ABS material designation in the SAP description tells you this is an ABS-based edge banding, so it aligns with projects that call for ABS rather than PVC or wood tape in shop standards. The CP41242 reference in the SAP description defines a specific decor or program code, so you can match this edgebanding visually with panels or components specified under the same code in a project schedule. The EMB LAC notation in the SAP description indicates an embossed, lacquered surface, giving the edge profile a textured, finished appearance that supports consistent visual quality along cabinet or furniture runs.

Key Edgebanding Details That Support Shop Work

• The 15/16 inch width in the SAP description lets you cover typical panel thicknesses with a slight overhang, which supports trimming workflows that target a flush, clean edge after machining.
• The 1mm thickness stated in the SAP description defines the build at the edge, so you can coordinate hinge cup drilling, hardware clearances, and edge profiles around that known thickness in your cut lists.
• The ABS material noted in the SAP description identifies it as ABS edge banding, so it can be specified consistently wherever ABS is required in commercial or residential woodworking jobs.
• The CP41242 reference in the SAP description ties this banding to a specific program code, helping you align edge material selection with panel or laminate choices that reference the same code.
• The EMB LAC designation in the SAP description points to an embossed, lacquered surface treatment, so the edge presents a finished look that matches the intended design standard along cabinet runs.

Edgebanding Dimensions That Guide Installation Setup

The 15/16 x 1mm sizing called out in the SAP description provides clear dimensions for tool setup, so you can set edgebanders and trimmers to handle a 1mm ABS edge and a width that slightly exceeds common panel thicknesses. The ABS material designation in the SAP description means you are working with ABS edge banding, so heat, feed speed, and trimming parameters can be tuned around ABS behavior rather than a different substrate. The embossed, lacquered reference (EMB LAC) in the SAP description indicates a surface with defined texture and finish, so pressure, roller settings, and trimming steps can be planned to protect that finished surface while achieving a clean, straight edge.

Using Rehau ABS Edgebanding 315431-072 In Projects

Where This ABS Edge Banding Is Typically Applied

This product is listed by Wurth Baer Supply in the edgebanding category and product class Edge Banding, so it is positioned for use on exposed panel edges in woodworking projects. The ABS material notation in the SAP description marks it as ABS edge banding, fitting applications where specifications call for ABS along cabinet, furniture, or fixture edges. The 15/16 inch width in the SAP description lets you address panel edges that relate to that coverage, so verticals, shelves, and tops cut to standard casework dimensions can be banded and trimmed back to a flush finish. The CP41242 code in the SAP description identifies a specific program or decor, which helps when a project spec lists CP41242 for coordinating parts, allowing you to select this banding as the matching edge solution within that program. The embossed, lacquered indication (EMB LAC) in the SAP description describes a textured, finished surface, so this banding suits visible edges where a finished look is required rather than a raw or unfinished tape.

Why These Rehau Details Matter For Repeatable Results

The manufacturer part number 315431-072 uniquely identifies this Rehau ABS edgebanding, so reordering the same part number repeats the same size and finish on follow-up jobs or service work. The 15/16 x 1mm dimension in the SAP description gives a fixed thickness and width, allowing consistent machine setups from job to job and reducing variation in edge appearance when running multiple batches. The ABS classification in the SAP description keeps material type consistent across projects, supporting predictable trimming, machining, and edge durability whenever ABS edge banding is specified. The CP41242 reference in the SAP description links directly to a decor or program, so designers, estimators, and shop staff can tie drawings, takeoffs, and material pulls to the same visual edge solution. The EMB LAC surface characterization in the SAP description provides a defined embossed, lacquered finish, which helps maintain a uniform edge appearance across different production runs because the surface character is tied to this exact specification.

Common Questions About Rehau ABS Edgebanding 315431-072

Select Rehau ABS Edgebanding 315431-072 For Matching Edges

Rehau ABS edgebanding 315431-072 combines an ABS material designation, a 15/16 x 1mm size, and the CP41242 EMB LAC description in one defined product, so edge work can be planned around those known parameters. The ABS classification and embossed, lacquered notation in the SAP description support projects that call for ABS edge banding with a finished surface on visible cabinet or furniture edges. The unique 315431-072 part number and CP41242 program reference in the SAP description help tie design intent, material pulls, and repeat orders to the same edgebanding choice, so selecting this item aligns edge details with specified dimensions and decor codes.