Rehau ABS edgebanding 315431-075 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut substrate is covered and protected on cabinets, casework, and fixtures. The listed size of 15/16 x 1mm gives enough width to cover standard panel thickness with a 1mm thick ABS profile where a solid edge is needed. The CP60464 reference in the description identifies the specific decor match so finished parts stay visually consistent across a project. The "EMB LAC" notation describes an embossed, lacquered surface that provides a textured appearance with a sealed finish, which supports a more finished look on visible cabinet or furniture edges. The 600FT length in the description indicates a continuous supply suitable for production runs, which reduces changeovers on edgebanders and supports consistent results from the first part to the last.
The 15/16-inch width on this Rehau ABS edge banding gives coverage beyond standard panel thickness, so installers can apply it and then trim flush without risking exposed substrate. The 1mm thickness provides a substantial edge that machines cleanly during trimming and scraping, supporting precise edge definition on cabinet doors, drawer fronts, and casework. The embossed lacquered EMB LAC finish creates a textured, sealed surface that responds well to normal edge processing, helping maintain its appearance as profiles are scraped or buffed. The CP60464 decor reference keeps the installed edge visually tied to CP60464-coordinated panels, simplifying layout when aligning edges across multiple components in a run.
This Rehau ABS edgebanding, identified by manufacturer part 315431-075, fits into woodworking and cabinet shops that need consistent edges on CP60464-coordinated projects. As an ABS edge banding in the edgebanding category, it is intended for finishing exposed panel edges on cabinets, casework, and furniture elements, so operators can move panels from cutting to edgebanding with a decor-matched edge solution ready. The 15/16 x 1mm format supports common panel work where a single width can serve a range of parts, reducing the number of different banding sizes stocked at the machine. With a 600FT run length in the description, a single roll serves extended production, which supports steady throughput on edgebanders and helps maintain color continuity across large orders.
The ABS material noted in the description provides a thermoplastic edge that can be trimmed, scraped, and lightly profiled after application, which supports clean transitions between the face and the edge on laminated or finished panels. The EMB LAC notation, describing an embossed lacquered finish, means the surface has both texture and a lacquered layer, so the edge maintains its appearance as typical machining removes minimal material during finishing passes. The CP60464 decor reference ensures the edge banding is specific to that design code, helping installers keep edges visually aligned with CP60464 panels for uniform runs of doors and casework. The 1mm thickness supports a solid feel at the edge that holds up to standard handling in cabinet shops, while the 15/16 width gives workable overhang for trimming, supporting repeatable, straight edges on both small components and full-height panels.
Rehau ABS edgebanding 315431-075 is described as ABS, providing a thermoplastic edge that can be trimmed and machined after application for clean cabinet and furniture edges.
Rehau ABS edgebanding 315431-075 with 15/16 x 1mm sizing offers width to cover panel thickness and a 1mm edge that trims cleanly for a defined finished profile.
Rehau ABS edgebanding 315431-075 uses the CP60464 reference so installers can match the edge decor to CP60464 panels, keeping doors and casework visually consistent.
Rehau ABS edgebanding 315431-075 marked EMB LAC has an embossed, lacquered surface, providing textured appearance with a sealed finish on exposed panel edges.
Rehau ABS edgebanding 315431-075 described at 600FT offers a long run length, supporting extended operation on edgebanders and uniform color across multiple parts.
Rehau ABS edgebanding 315431-075, classified as edge banding in the edgebanding category, suits finishing exposed cabinet, furniture, and casework panel edges.
Rehau ABS edgebanding 315431-075 combines ABS construction, a 15/16 x 1mm format, and an embossed lacquered CP60464 finish to support durable, decor-matched edges on cabinet and casework panels. The 600FT run length suits production-focused shops working through repeated CP60464 jobs. For projects built around this decor and size range, this edge banding keeps panel edges visually aligned and ready for standard trimming and machining steps in the shop.
Sold In: 1 Roll