Rehau ABS edgebanding 315431-077 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so they present as a continuous surface, which matters when you want a consistent look across cabinets or casework runs. The 15/16 inch width covers the full thickness of common sheet-goods with a bit of overhang, giving room to trim back to a flush edge without exposing substrate. The 1mm thickness provides a solid edge profile that stands up to normal handling on cabinet doors and shelves, while still trimming cleanly with typical edgebanding tools. The CP41253 embossed lacquer description identifies a specific surface and finish combination, helping match this banding to panels using the same CP41253 design in a shop or job standard. The 600ft length noted in the description supports longer production runs or multiple smaller projects from a single roll, reducing changeovers in the workflow.
The 15/16 inch width on this Rehau ABS edgebanding gives installers extra coverage past the panel faces, which allows precise trimming back to flush edges without risking reveal of the core material. The 1mm thickness creates a substantial but manageable edge, which works well with standard trimming tools that are tuned for 1mm banding in cabinet and woodworking shops. As an ABS edge banding, it aligns with tooling and feed setups already configured for ABS materials, which keeps machine adjustments minimal between jobs using similar banding. The defined CP41253 embossed lacquer finish identified in the description supports jobs where the edgeband surface needs to visually follow that same design specification, which helps maintain a uniform appearance across multiple pieces.
This Rehau, Inc. ABS edge banding, listed as 15/16X1MM ABS CP41253 EMB LAC 600FT, fits well anywhere a finished panel edge is needed that aligns with the CP41253 embossed lacquer design. The 15/16 inch width suits cabinet boxes, shelves, and doors cut from standard sheet-goods, because it covers both faces with clearance for clean trimming on straight runs. The 1mm thickness suits edges that see regular handling, such as cabinet doors, drawer fronts, or vertical end panels, since that profile reads as solid without being bulky. As an ABS edge banding under the Rehau brand, it matches workflows already using ABS banding in woodworking or cabinet production environments, keeping material types consistent across different jobs that share this CP41253 design reference.
The defined 15/16 inch by 1mm sizing of the 315431-077 edgebanding lets shops standardize equipment settings around this format, which reduces test cuts and fine-tuning between batches of similar work. The CP41253 embossed lacquer description provides a clear finish identifier, which helps teams pull the correct edgeband when a drawing or cut list calls out that specific CP41253 surface. The 600ft length supports repeatable output across many identical parts, because one roll can cover multiple cabinets or project sets without changing rolls mid-stream. The ABS material classification keeps performance characteristics consistent from part to part, which matters when dialing in trimming and scraping to achieve the same edge quality across an entire run of casework or fixtures.
Rehau ABS edgebanding 315431-077 is described as 15/16X1MM, meaning it is approximately 15/16 inch wide and 1mm thick, which supports full edge coverage with material for trimming.
Rehau 315431-077 edge banding is identified as ABS, giving it the thermoplastic characteristics associated with ABS materials used in cabinet and woodworking applications.
The SAP description lists 600FT, so this ABS edgeband is supplied in a 600 foot length, which supports extended production runs or multiple jobs from one roll.
On this edgeband, CP41253 embossed lacquer identifies a specific surface design and lacquered texture, which helps match the edging to panels using the same CP41253 reference.
ABS edgebanding 315431-077 is from Rehau, Inc., a brand identified in the product data, which aligns this product with other Rehau edge banding lines.
ABS edgeband 315431-077 suits cabinet, casework, and similar woodworking projects that require ABS edge banding in a 15/16 inch by 1mm size with the CP41253 finish reference.
Rehau ABS edgebanding 315431-077 combines a 15/16 inch width, 1mm thickness, and CP41253 embossed lacquer designation, so it aligns with projects calling for that exact size and design. The 600ft length supports both shop production and larger site programs. For work centered on ABS edge banding with this CP41253 reference, this Rehau, Inc. option from Wurth Baer Supply provides a defined, repeatable choice for finishing panel edges to match the specified surface.
Sold In: 1 Roll