Rehau ABS edgebanding 315431-119 is an ABS edge banding product that covers and finishes exposed panel edges, so cabinets and casework present a controlled, uniform edge instead of raw board. This Rehau, Inc. ABS edgebanding is identified as product class Edge Banding, which positions it as a working component in cabinetry and furniture builds where a clean edge treatment is required. The 15/16 x 1mm size in the SAP description aligns the banding width and thickness to common panel constructions, so the edge band can cover the face without excessive trimming while maintaining a consistent profile. The CP41265 EMB LAC notation describes an embossed and lacquered surface, which gives the banding a defined texture and sealed finish so the edge visually aligns with the chosen design while presenting a finished surface ready for regular handling in typical woodworking environments.
The 15/16 x 1mm size called out in the SAP description sets the working dimensions for installation, so edge banding equipment can be configured with guides and cutters that match this width and thickness for repeatable passes. The embossed, lacquered CP41265 surface described in the product data defines the top face the installer or fabricator works against, so feed direction and trimming can be planned to respect the finished side during banding and post-processing. Because the product is classified under Edge Banding, it integrates into standard edgebanding workflows, allowing shops to stage this Rehau ABS edgebanding alongside other banding materials while maintaining known thickness when setting pressure rollers, trimming stations, and flush-routing setups.
The Rehau ABS edgebanding 315431-119 designation identifies a branded ABS edge banding solution used to cover panel edges on cabinets, casework, and furniture components, so builders can match exposed edges to their design scheme instead of leaving visible substrate. The 15/16 x 1mm dimension in the SAP description gives enough width to span typical panel thickness and a controlled thickness for trimming, so edges can be machined flush without creating a bulky profile at doors, drawer fronts, or carcass edges. The CP41265 EMB LAC finish callout specifies an embossed, lacquered surface, so the visible edge can coordinate with textured or finished surfaces in a project while presenting a sealed outer layer. As an Edge Banding product in the Edgebanding category, it becomes part of the finishing sequence for laminated or fabricated panels, so shops can run this banding after cutting and boring operations to complete parts before assembly.
The ABS material identified in the SAP description provides a uniform thermoplastic substrate along the entire Rehau ABS edge banding length, so trimming knives, end trimmers, and scrapers encounter the same material response from part to part, supporting consistent edges across a job. The 1mm thickness reference in the size description defines how much material stands proud during application, so operators can set trimming depth and scraper pressure to remove just the excess while keeping the face surface intact. The 600FT length called out in the SAP description means a continuous run of edgebanding is available for extended production, so long cabinet runs, banks of doors, or repeat components can be edged without frequent material changes, supporting color and finish continuity. The embossed, lacquered CP41265 surface further defines the final edge characteristics, so finishing and inspection steps can quickly confirm that edges match the intended texture and sheen throughout the project.
Rehau ABS edgebanding 315431-119 is an ABS edge banding used to cover exposed panel edges, so cabinet and furniture parts present a finished edge instead of visible core material.
The 15/16 x 1mm dimension provides width to span common panel thickness and a controlled thickness, so trimming equipment can produce flush, consistent edges on doors and casework.
The CP41265 EMB LAC designation indicates an embossed, lacquered surface, so the edgebanding presents a textured, sealed finish that coordinates with matching decorative surfaces.
ABS edge banding, as identified in the product data, provides a thermoplastic edge material, so machining, trimming, and finishing steps follow familiar cabinet shop practices.
The 600FT description signals a long run of edgebanding, so multiple cabinets or larger projects can be edged from a single roll, supporting consistent appearance across parts.
Rehau, Inc. is listed as the brand, so this ABS edgebanding slots alongside other Rehau panel and edge solutions in shops already standardizing on that product family.
Rehau ABS edgebanding 315431-119 combines ABS material, a 15/16 x 1mm size, and a CP41265 embossed, lacquered finish, so it fits into cabinet and furniture edge treatment where a matching, finished edge is required. The Edge Banding product class and 600FT length described in the SAP data position this edgebanding for both one-off builds and production runs, where consistent thickness and surface texture are important for trimming and visual continuity. For shops aligning projects to this specific CP41265 finish and size, selecting this Rehau ABS edge banding ties edge details directly to the specified panel design.
Sold In: 1 Roll