Rehau ABS edgebanding 315431-122 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut substrate is covered and visually unified. The 15/16 inch width gives coverage across common panel thicknesses while leaving a small trimming margin, which supports tight, straight final edges after machining. The 1mm thickness provides a solid ABS band that can be worked with typical edge banding equipment, giving a consistent profile along doors, drawer fronts, or case parts. The CP21006 reference in the description identifies a specific design variant within the Rehau program, which helps match this roll to existing jobs or prior installations. The EMB LAC detail in the description further distinguishes this item from other ABS edge banding options, which supports consistent appearance on multi-room or repeat projects where visual continuity matters.
The 15/16X1MM ABS CP21006 EMB LAC 600FT description specifies that this Rehau ABS edgebanding is supplied in a 15/16 inch width, which gives installers adequate coverage over the raw panel edge during application. That same description specifies a 1mm thickness, so equipment can be set up around a known band dimension for trimming and scraping passes. The ABS material designation in the description indicates the band is an ABS edge banding, so tooling, feed speeds, and heat settings can be chosen with that substrate in mind. The 600FT detail in the SAP description defines the linear footage available on this item number, which supports planning runs and grouping work so setup and changeover are minimized during edging operations.
This product is categorized as Edge Banding under Miscellaneous|Edgebanding, which positions it for use on panel edges in cabinetry, furniture, or similar casework where raw board edges need a finished face. The Rehau ABS Edgebanding, 315431-122 name links the material directly to Rehau, Inc., so shops already using Rehau programs can align this band with established finishes on existing installations. The SAP description listing 15/16X1MM ABS CP21006 EMB LAC 600FT defines a band sized for full edge coverage with a trim allowance, helping panels present a continuous surface line after edging. As ABS edgebanding, this material gives the edge a defined profile instead of leaving exposed substrate, which supports a more uniform look across doors, drawer fronts, and larger cabinet sides.
The SAP description explicitly states 15/16X1MM for this ABS edge banding, so setups can be calibrated around a predictable 1mm band thickness and 15/16 inch width, which streamlines machine adjustments between jobs. That defined width allows slight overhang on typical panel thicknesses, supporting clean trimming without starving the edge. The 600FT length noted in the description gives a single item that covers substantial linear distance, so larger runs of parts can be edged from the same roll, helping maintain visual consistency across a project. The CP21006 EMB LAC reference in the description distinguishes this band from other Rehau ABS options, which matters when repeating a prior specification where the same surface design and edge profile are required job after job.
Rehau ABS Edgebanding, 315431-122 is an ABS edge banding in the Edge Banding product class, so it is intended for finishing and covering exposed panel edges in woodworking projects.
The SAP description lists 15/16X1MM, meaning the band is approximately 15/16 inch wide and 1mm thick, which supports full edge coverage with allowance for trimming after application.
The SAP description specifies 600FT, so this ABS edgebanding item number provides 600 feet of banding length for planning project coverage and production runs.
This product is described as ABS in the SAP text, indicating it is an ABS edge banding, so it is suited to equipment and settings commonly used for ABS edgebanding materials.
The edgebanding is identified by Manufacturer Part # 315431-122 and the SAP description 15/16X1MM ABS CP21006 EMB LAC 600FT, helping align purchasing with shop specifications.
This ABS edge banding is offered by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry, which positions it within a broad range of shop materials.
The Rehau ABS Edgebanding, 315431-122 combines a 15/16 inch width, 1mm thickness, and 600FT length as detailed in the SAP description 15/16X1MM ABS CP21006 EMB LAC 600FT, giving shops a clearly defined band for edge work. As an ABS edge banding from Rehau, Inc. in the Edge Banding product class, it aligns with typical edging processes used on cabinets, furniture, and related millwork. Selecting this specific 315431-122 part number ties production directly to an identified Rehau ABS edgebanding, supporting repeatable results when the same edge appearance and dimensions are required across multiple jobs.
Sold In: 1 Roll