Rehau ABS edgebanding 315431-137 is ABS edge banding from Rehau, Inc. that finishes raw board edges so cabinet and furniture projects present a consistent, professional edge around visible panels. This edgebanding belongs to the Edge Banding product class, so it is intended specifically to cover and protect exposed substrate edges rather than broad surfaces. The SAP description identifies a 15/16 x 1mm ABS profile, which lets you cover standard panel thicknesses while keeping a modest 1mm edge that blends well with adjacent faces. The ABS material gives you a defined, uniform edge profile that responds predictably to trimming and finishing steps on typical woodworking jobs. A length of 600ft in the SAP description indicates a coil-sized run that supports continuous processing on edgebanders during production work, reducing interruptions on longer cabinet or fixture batches.
The 15/16 x 1mm sizing in the SAP description defines how this ABS edge banding presents at the panel edge, giving installers a clear sense of overhang and trim allowance during application. With 15/16 inch of width, the banding can cover the face of common casework and cabinet panels while still providing slight margin for flush trimming operations. The 1mm thickness sets the edge build, influencing how the transition from face material to edge will look and feel after trimming. Because this product is specifically described as ABS edgebanding, installers can plan their machine settings, feed speeds, and trimming tools around the handling characteristics typical of ABS material in edgebanders and trimmers.
This product is classified as Edge Banding in the edgebanding category, which positions it for use on exposed edges of panels in cabinet and furniture assemblies. The Rehau ABS edgebanding designation aligns it with woodworking environments where synthetic edge material is preferred on casework sides, bottoms, and shelves. The ABS description and 15/16 x 1mm sizing support use on cabinet boxes or similar constructions where a narrow, consistent edge profile is desired along vertical and horizontal runs. The SAP description's mention of 600ft fits shop workflows that process multiple panels in series, allowing a single coil to handle many cabinet parts without splicing different materials mid-run.
The combination of 15/16 inch width and 1mm thickness in the SAP description shapes how consistently this Rehau ABS edgebanding sits on panel edges during production. That fixed width helps operators set guide fences and edgebander settings once, then run multiple panels with the same overhang behavior, reducing adjustment between parts. The 1mm thickness gives a known edge build that affects flush trimming, scraping, and any later sanding, so finish steps can be standardized across a job. Identifying the product clearly as ABS edgebanding from Rehau, Inc. also helps keep material behavior predictable from coil to coil, which supports consistent trimming quality and visual uniformity across every completed cabinet or furniture component in a project.
Rehau ABS edgebanding 315431-137 is described as ABS edgebanding, so it uses ABS material, giving a synthetic edge suited to machining and trimming on woodworking equipment.
The 15/16 x 1mm sizing in the SAP description defines the edge banding width and thickness, guiding how it covers panel edges and how much material is trimmed after application.
The 600ft length in the SAP description supports extended runs on an edgebander, so shops can process many panels in sequence without changing coils during a job.
This edge banding is identified with Rehau, Inc. as the brand, aligning it with Rehau ABS edgebanding products used in cabinet and furniture edge finishing.
The product is listed in the Edge Banding product class within the edgebanding category, indicating its role is to cover raw panel edges in woodworking projects.
The manufacturer part number 315431-137 uniquely identifies this specific Rehau ABS edgebanding, helping match material when repeating or extending cabinet and furniture jobs.
Rehau ABS edgebanding 315431-137 combines a defined 15/16 x 1mm profile with ABS material and a 600ft length described in the SAP record, aligning well with edge finishing on cabinet and furniture panels. As an Edge Banding product from Rehau in the edgebanding category, it is structured for covering exposed panel edges in woodworking environments where consistent, repeatable trimming and machining are important. When a project standardizes on this manufacturer part number 315431-137, shops can rely on the same ABS edge profile and dimensions from coil to coil. Wurth Baer Supply lists this product under WBSC - 1432 - RU315431-137, providing a direct path to source this specific Rehau ABS edgebanding for upcoming production runs.
Sold In: 1 Roll