Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 315431-138 is ABS edge banding designed to finish and protect exposed panel edges in cabinet and casework projects, so raw substrate is covered in one continuous step. The 15/16 inch width gives coverage for standard panel thicknesses with a small overhang, allowing trimming for a flush, professional edge on doors, drawer fronts, or shelving. The 1mm thickness provides a solid edge that supports a defined profile when trimmed and routed. The CP21028 designation identifies a specific color or decor, helping match edges to coordinated board or laminate in a project line. The embossed lacquer finish creates a textured, coated surface, so the edge presents a consistent appearance along the run. The 600FT length supports longer production runs or multiple jobs from a single roll, reducing changeovers and helping maintain color continuity across many parts.
The 15/16 inch width on this Rehau ABS edgebanding gives installers working room on both faces of a typical panel, so the banding can be centered and then trimmed back to flush on each side. The 1mm thickness supplies enough material for edgebanding machines and hand tools to track steadily without tearing through the band, which supports clean cuts along cabinet parts. The CP21028 decor, combined with the embossed lacquer finish, defines the visible surface during fitting, so operators can orient and feed the band with the decorative side correctly presented. The 600FT length provides a single, continuous supply to feed through an edgebander or manual process on multiple pieces, which helps maintain the same appearance and edge profile across a full job.
This Rehau, Inc. ABS edgebanding in the 15/16 inch by 1mm size is suited to covering exposed edges on casework, cabinet boxes, shelves, and fronts where a CP21028 decor is required. The ABS edge banding format means it is intended for use on panel edges rather than broad surfaces, directing it to edge finishing steps in a woodworking workflow. The embossed lacquer finish makes the edge a visible design element, so it works well wherever the edge line is part of the overall look, such as open shelving or cabinet runs. The 600FT roll length fits production environments or extended custom projects, where multiple components share the same color and finish, supporting consistent edges from the first part to the last.
The 15/16 inch width gives margin around standard panel thicknesses, so operators can rely on enough overhang for trimming without recalculating widths for each piece, which supports repeatable setups on edgebanding equipment. At 1mm thick, the banding offers a balance between a substantial edge and efficient material use, helping maintain a defined profile while keeping machining times familiar for common ABS edgebanding processes. The CP21028 decor reference simplifies part identification on the shop floor, so material handlers and machine operators can match the correct banding to coordinated components by part number. The embossed lacquer finish affects how the edge looks and feels after trimming, creating a finished surface once the excess is cut away. With a 600FT roll, planners can schedule longer runs of matching work without frequent material changes, supporting smoother throughput and consistent edges across cabinets, panels, and related parts.
Rehau ABS edgebanding 315431-138 is specified as 15/16 inch wide and 1mm thick, giving coverage for typical panel edges while allowing trimming back to a clean, flush finish.
The CP21028 embossed lacquer description indicates a defined decor and a textured lacquered surface, so the visible edge shows a specific color or pattern with a coated finish.
This ABS edge banding is specified at 600FT in length, which supports longer edgebanding runs and multiple related projects from a single roll of material.
Rehau 315431-138 edge banding is made from ABS, providing a synthetic edge suitable for machining, trimming, and routing along cabinet and furniture panel edges.
The 1mm thickness offers enough material for trimmers and routers to track smoothly, helping achieve a solid-feeling edge and controlled profiling on finished parts.
The 15/16 inch width provides slight overhang on common panel sizes, so edges can be applied with some tolerance and then trimmed back without exposing the panel core.
This Rehau ABS edgebanding, specified as 15/16 inch by 1mm in CP21028 embossed lacquer and supplied in a 600FT length, supports edge finishing where a defined decor and consistent appearance are required. The width and thickness give installers working room for trimming, while the ABS construction and embossed lacquer finish establish the final look along cabinet and furniture edges. For projects built around the CP21028 decor, this banding ties exposed edges into the overall design line in one continuous edging step.
Sold In: 1 Roll