Rehau ABS edgebanding 315431-141 is an ABS edge banding designed to finish panel edges with a consistent profile, so cabinet and furniture projects present a uniform edge treatment along every run. The 15/16 inch width stated in the description covers typical panel thicknesses with a bit of working margin, which supports trimming without exposing the core material. The 1mm thickness noted in the SAP description gives the edge a defined presence, which helps panels feel more substantial at doors, drawer fronts, and casework edges. The CP10082 reference in the SAP description identifies a specific design or decor within the Rehau line, so projects that already use that decor can maintain visual continuity on new work or repairs. The embossed lacquer description indicates a textured, coated surface on the band, which supports a finished appearance along the edge that aligns with the selected decor.
The specified 15/16 inch width gives some overhang on standard panel thicknesses, which supports straight-line or contour trimming operations while still maintaining full edge coverage. The 1mm thickness listed for this ABS edge banding provides a predictable profile for edgebander setup, so cutters and trimmers can be dialed in to this material thickness across a run. The ABS material designation in the description indicates a plastic edge rather than a wood veneer, which suits machining on automated edgebanders or manual application methods that are set up for ABS stock. The embossed lacquer note points to a coated, textured surface, which aligns with projects that require a decor-matched, finished edge rather than a raw band ready for separate finishing steps.
This product is classified as edge banding in the business data, which places it directly in cabinet and furniture edge finishing workflows for woodworking shops. The Rehau brand designation ties it to a recognized manufacturer of edgebanding products, which aligns with professional environments that already use Rehau decors and need consistent material across multiple jobs. The ABS material referenced in the SAP description suits use on casework, doors, and drawer fronts where a plastic edge profile is preferred over wood veneer, supporting impact-tolerant edges on common woodworking substrates. The CP10082 decor identifier and embossed lacquer description connect this band to a specific visual and surface effect, which helps projects maintain the same look across vertical and horizontal components wherever this decor is specified.
The 15/16 inch width called out in the description gives operators a known starting dimension, which simplifies edgebander setup when dialing in tape positioning and trim allowances relative to panel thickness. The 1mm thickness provides a consistent material section for cutter heads and trimmers, which supports repeatable results on both straight and contoured edges without constantly resetting to different tape thicknesses. The ABS designation signals a thermoplastic edge, which matches process settings, feed speeds, and trimming approaches that shops use for ABS rather than veneer or PVC, reducing trial-and-error on multi-run jobs. The combination of CP10082 decor and embossed lacquer surface gives a specific texture and appearance along the edge, which allows finished pieces using this band to visually align with panels or components that carry the same decor reference in the Rehau system.
Rehau ABS edgebanding 315431-141 is described as ABS, so it provides a thermoplastic edge that suits machining and trimming workflows set up for ABS edge banding in cabinet and furniture production.
The 15/16 inch width gives coverage beyond common panel thicknesses, allowing slight overhang for trimming so the substrate edge is fully covered after processing.
The stated 1mm thickness provides a consistent edge profile, letting edgebander and trimmer settings be matched to that thickness for more predictable cutting and finishing results.
The CP10082 reference identifies a specific decor in the Rehau range, helping align this ABS edgebanding with panels or components that use the same decor in a project.
The embossed lacquer description indicates a textured and coated surface on the edgeband, providing a finished appearance that coordinates with the CP10082 decor along visible edges.
This edge banding, classified as edge banding for woodworking, covers raw panel edges so cabinet and furniture components present a consistent, decor-matched finished edge in assembled projects.
The Rehau ABS edgebanding 315431-141 combines a 15/16 inch width, 1mm thickness, and ABS material to support controlled trimming and machining on standard cabinet and furniture substrates. The CP10082 decor reference and embossed lacquer description tie the band to a specific appearance, which helps projects align edges with panels and components using the same Rehau decor. For work that needs ABS edge treatment in this size and decor family, this banding provides a defined option for finishing exposed panel edges to match that selection.
Sold In: 1 Roll