Rehau ABS edgebanding 315431-144 is an ABS edge banding that covers and protects exposed panel edges, creating a finished look that matches your workpiece layout. The 15/16 inch width gives coverage over typical 3/4 inch panels, leaving room to trim for a crisp edge line. The 1mm thickness provides a substantial edge profile that sands and flush-trims predictably, helping maintain straight cabinet and furniture lines. The ABS material gives a solid, consistent surface along the edge, supporting reliable bonding with common edgebanding equipment. The CP40798 reference in the description identifies a specific decor or finish series, allowing repeatable selection when a job calls for this exact visual. The 600 ft length in the SAP description means long continuous runs on a job can be handled from a single coil, reducing splice points along cabinet sides and tops.
The SAP description lists this Rehau ABS edge banding as 15/16 x 1mm, which positions the material well for covering the faces of 3/4 inch engineered panels with trimming allowance. That extra width gives some margin when aligning the band on the edge, which helps installers keep glue squeeze-out and minor panel variances off the final visible surface. The 1mm thickness works with many standard edgebanders and handheld trimmers, giving a balance between a substantial look and efficient machining. Together, these dimensions support repeatable results when running multiple doors, drawer fronts, or shelves to the same specification.
This product is classified as edge banding in the edgebanding category, which positions it for covering exposed edges on cabinets, furniture, and other panel-based assemblies. The ABS material referenced in the SAP description works with typical woodworking processes on engineered wood panels, so it fits into shop environments using edgebanders or hand-application methods for ABS. The CP40798 decor code in the SAP description defines a specific appearance, making it suitable when a project specification or prior installation calls out that exact Rehau reference. The 600 ft length noted in the SAP description benefits production runs where many parts share the same edge treatment, allowing edges on multiple components to be banded to the same visual and dimensional standard.
The 15/16 inch width described in the SAP data allows the banding to overhang both sides of 3/4 inch material, which simplifies alignment on the machine and gives enough excess to trim back to a crisp edge without risking reveal of the core. The 1mm thickness identified in the SAP description creates an edge that is thick enough to read as a defined band while still processing efficiently through common trimming and scraping stations. The Rehau brand referenced in the product name connects this coil to a defined manufacturing source, which supports consistent behavior from roll to roll when repeating a job. The manufacturer part number 315431-144 and matching SAP description make it straightforward to reorder the same ABS edgebanding for future phases of a project, helping keep color, texture, and edge dimensions aligned across multiple installs.
Rehau ABS edgebanding 315431-144 is described as 15/16 x 1mm, so it provides overhang on 3/4 inch panels and a 1mm edge thickness that works well with standard trimming equipment.
This 315431-144 edge banding is described as ABS in the SAP data, giving a uniform plastic edge that machines predictably in typical woodworking and cabinet shop processes.
The SAP description lists this Rehau ABS edgebanding as 600 ft, supporting long or repeated runs of cabinet parts without frequent coil changes.
The CP40798 EMB LAC reference in the SAP description identifies a specific Rehau decor and surface combination, helping match projects that specify this exact code.
The 15/16 inch width provides edge coverage beyond 3/4 inch panels, giving margin for trimming and supporting clean, fully covered cabinet and furniture edges.
The Rehau 315431-144 part number ties directly to this ABS edgebanding specification, simplifying reorders when future work needs the same decor and dimensions.
Rehau ABS edgebanding 315431-144 combines a 15/16 inch width, 1mm thickness, and ABS construction to deliver a defined edge that aligns with common cabinet and furniture panel sizes. The CP40798 EMB LAC designation and 315431-144 part number connect the coil to a specific Rehau decor and configuration, supporting continuity across phases of a project. With a 600 ft length identified in the SAP description, this coil suits production-minded shops planning multiple components around a single, consistent edge detail.
Sold In: 1 Roll