Rehau ABS edgebanding 315431-155 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so they match the intended design and protect the core material in everyday woodworking use. The 15/16 inch width covers standard panel thicknesses while giving a small margin to trim for a tight, professional edge line. The 1mm thickness provides a solid edging layer that stands up to normal shop handling as you cut, apply, and flush-trim the band. The ABS material creates a uniform, work-ready surface that responds predictably to typical edgebanding equipment and hand tools. The CP60507 embossing code identifies the surface texture used on this band, keeping edge appearance consistent wherever it is applied on a job. The lacquered finish noted in the description provides a pre-finished surface, saving finishing steps on the edge itself once the band is bonded and trimmed.
The 15/16 inch by 1mm sizing in the SAP description sets clear expectations for fit, letting installers set up guides, cutters, and trimming tools around a known width and thickness. That consistent dimensioning helps reduce adjustment time between jobs that use the same edge band. The ABS construction works with common edgebanding workflows, so standard edgebanders, trimmers, and scrapers can be dialed in to this thickness for dependable tracking. The lacquered surface described in the product data means the visible face of the edge presents a finished look as soon as it is applied and trimmed, which simplifies final steps when preparing cabinet parts or furniture components.
This Rehau ABS edgebanding is categorized as edge banding for woodworking, positioning it as a standard choice when finishing exposed edges on panels. The 15/16 inch width accommodates common panel thicknesses used in cabinetry and furniture, giving enough overhang to trim cleanly without crowding the panel face. With a 1mm thickness, the band provides a substantial edge that aligns well with typical cabinet and casework build-ups. The ABS material supports a consistent look around doors, drawer fronts, and carcass parts, as the same band can be used anywhere this dimension and texture are required. The CP60507 embossing code connects the band to a defined texture profile, helping you keep edges aligned with surfaces that carry the same pattern across a project.
The specific 15/16 inch width and 1mm thickness allow shops to tune edgebander pressure, heat, and trimming operations once and apply those same settings across all parts using this band. That dimensional consistency helps reduce rework from uneven trimming or misaligned edges. The ABS construction works well with typical routing or scraping for flush trimming, so operators can expect predictable chip formation and edge quality at the machine. The lacquered surface described in the data presents a stable finished face, which helps maintain a uniform appearance when edges are viewed alongside finished panel surfaces. The clear manufacturer part number 315431-155 further supports repeatable work by giving purchasing and production a single, precise reference when aligning stock, machine setups, and finished parts.
Rehau ABS edgebanding 315431-155 is made from ABS, giving a consistent synthetic edge that machines predictably during cutting, bonding, and trimming in woodworking applications.
Rehau ABS edgebanding 315431-155 is specified as 15/16 inch wide by 1mm thick, providing coverage for standard panel thicknesses and a defined thickness for machine setup.
Rehau ABS edgebanding 315431-155 uses CP60507 embossing, giving it a defined surface texture so edges visually coordinate with panels using the same pattern.
Rehau ABS edgebanding 315431-155 is described as lacquered, so the edge surface has a finish layer that presents a ready-to-use appearance after application and trimming.
The 1mm thickness of Rehau ABS edgebanding 315431-155 gives a substantial edge profile, helping it track well through edgebanders and trim cleanly with routers or scrapers.
The part number 315431-155 uniquely identifies this Rehau ABS edgebanding, allowing shops to match existing work and keep purchasing aligned with established specs.
This Rehau ABS edgebanding 315431-155 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, ABS construction, CP60507 embossing, and a lacquered surface, giving shops a clearly defined edge band for repeatable cabinet and furniture work. When projects call for an ABS edge in this dimension and texture, choosing this specific Rehau part number ties material selection, machine setup, and finished appearance to one consistent product.
Sold In: 1 Roll