Rehau ABS edgebanding 315431-208 is an ABS edge banding designed to cover and protect raw panel edges, giving a finished look that holds up in everyday cabinet and woodworking use. The 15/16 inch width lets you cover standard panel thicknesses with a bit of overhang for flush trimming, so exposed core material is concealed and the edge reads as a continuous surface. The 1mm thickness provides a solid edge profile that stands up to handling while still working well with common edgebanding tools and trimming equipment. The ABS construction keeps the material consistent along the 600 foot length, so long runs and multiple components can be processed from the same roll for a uniform appearance across a job.
The 15/16 inch width on this ABS edgebanding gives you enough coverage to align the banding slightly proud of the panel face, then trim back to a precise edge in a single pass. The 1mm thickness produces an edge that works well with common trimming knives and router-based flush-trim setups, supporting smooth cuts without digging into the panel. The 600 foot length means the material can stay loaded through longer runs, reducing roll changes during installation and helping keep feed and trimming setups consistent over the course of the job.
This Rehau ABS edgebanding, listed under the edge banding product class and edgebanding category, is suited to woodworking projects where raw sheet-good edges need to be covered. The 15/16 inch width makes it appropriate for edging panels where a slight overhang is preferred for trimming, so cabinet sides, shelves, and similar components can be processed efficiently. With 1mm thickness, the banding creates a defined edge profile that works on doors, drawer fronts, and casework parts where a solid-feeling edge is required. The 600 foot roll length supports batch runs of matching components, so shops producing multiple units of the same cabinet or fixture can pull all edges from one continuous supply for visual consistency.
The 15/16 inch by 1mm sizing of this ABS edgebanding supports predictable setup on edgebanders and manual application stations, because the trim allowance and edge thickness stay constant from part to part. Installers can set trimming tools to work with the 1mm edge and keep that setting across the 600 foot roll, which helps reduce rework from inconsistent edges. The ABS construction, specified in the product description, delivers a uniform material for the full length, so feed pressure, heat, and trimming response stay similar throughout the run. Identifying the product by the manufacturer part number 315431-208 allows shops to reorder the same edgebanding when repeating a job, helping maintain the same edge look and feel on future phases or matching repairs.
This Rehau ABS edgebanding is specified as 15/16 inch wide and 1mm thick, giving coverage for standard panel edges with enough material for trimming to a clean finished edge.
The 1mm thickness provides a defined edge that works well with common trimming tools, so installers can flush-trim to the panel without cutting through or leaving a weak edge.
The 600 foot length supplies enough ABS edgebanding for longer production runs, so multiple cabinets or sets of parts can use the same roll for uniform edges.
This edge banding is made from ABS, providing a consistent synthetic edge material that responds predictably during application and trimming in woodworking operations.
The edgebanding is identified as Rehau ABS Edgebanding, manufacturer part number 315431-208, which helps shops match the same material on repeat jobs.
This product is classified as edge banding in the edgebanding category, aligning it with other materials used to finish exposed panel edges in woodworking.
This Rehau ABS edgebanding 315431-208 combines a 15/16 inch width, 1mm thickness, and 600 foot length to support consistent edging across cabinet and panel work. When a job calls for ABS edge banding with repeatable dimensions and appearance, this roll aligns well with that requirement.
Sold In: 1 Roll