Rehau ABS edgebanding 315431-228 is an ABS edge banding that covers and protects exposed panel edges on woodworking and cabinet projects. The 15/16 inch width spans typical board thicknesses, so the banding can fully cover the substrate edge in a single pass. The 1mm thickness gives a solid edge profile, which supports a more substantial feel and a defined transition at the panel face. The ABS material provides a uniform surface along the edge, which supports consistent appearance across multiple panels in a run. The Rehau brand identification ties this edgebanding to a recognized manufacturer, which helps buyers match it to existing specifications that call out Rehau ABS edge banding. The edge banding product class designation confirms its role at the perimeter of panels, so it can be planned as the finishing step after cutting and machining sheet goods.
The SAP description lists this product as 15/16X1MM ABS CP60568 EMB LAC 600FT, so the width, thickness, material, and roll length are defined for planning. The 600 foot length allows shops to schedule longer runs or multiple cabinets from a single roll, which supports fewer changeovers during edgebanding operations. The 15/16 inch width is sized to work with common sheet goods, so installers can align it over the panel edge and trim excess during processing. The 1mm thickness interacts predictably with edgebanding trimmers and routers, supporting repeatable edge finishing steps. The ABS designation in the description clarifies the material type for matching to other ABS components on the same project.
This product is classified under Edgebanding and described as 15/16X1MM ABS CP60568 EMB LAC 600FT, so it is intended for edge treatment on sheet-based components. In cabinet or panel production, the 15/16 inch width covers the full thickness of typical engineered panels with a margin for trimming, which helps produce crisp, straight edges on doors, shelves, and carcass parts. The 1mm thickness gives a defined edge that works well where a more substantial profile is desired along high-visibility fronts. Because the material is ABS, the edge maintains a consistent surface along the length, which is important when multiple parts line up in a run of cabinetry or casework. The roll format at 600 feet supports continuous feeding through edgebanders or manual application over many parts in the same setup.
The manufacturer part number 315431-228 ties every roll of this Rehau ABS edgebanding to a specific configuration, which simplifies matching future orders to an existing job. The SAP description 15/16X1MM ABS CP60568 EMB LAC 600FT spells out width, thickness, material, and length in one line, helping drafters, purchasers, and shop staff reference the same product details across drawings, cut lists, and ordering systems. The Rehau, Inc. brand listing associates the edgebanding with a single manufacturer, which matters when production documents specify Rehau ABS edgebanding for continuity on commercial or repeat programs. The edge banding product class makes its use point clear in a hardware set, so it can be scheduled alongside hinges, slides, and other cabinet components in project planning.
Rehau ABS edgebanding 315431-228 is described as 15/16X1MM, so it provides a 15/16 inch wide strip with 1mm thickness for covering panel edges.
This ABS edgebanding is listed at 600FT, so it supports longer production runs or multiple cabinets from one roll, reducing changeovers during edge work.
Rehau 315431-228 edge banding is identified as ABS in the description, so it provides an ABS surface along the panel edge to match ABS-based specifications.
This product has a 1mm thickness, giving a more substantial edge profile that interacts predictably with trimming tools and supports a defined edge line.
The 15/16 inch width provides coverage across common panel thicknesses with extra for trimming, helping create flush, clean cabinet and panel edges.
The 315431-228 manufacturer part number identifies this exact Rehau ABS edgebanding, supporting accurate reordering for repeat jobs or repairs.
Rehau ABS edgebanding 315431-228 delivers a 15/16 inch wide, 1mm thick ABS edge banding in a 600 foot length, aligning with cabinet and panel production needs. The defined dimensions and the 315431-228 part number support straightforward specification and repeat purchasing. For shops standardizing on Rehau, Inc. ABS materials, this edge banding fits directly into edge treatment workflows where a consistent ABS edge is required across multiple parts.
Sold In: 1 Roll