Rehau ABS edgebanding 315431-230 gives you a defined edge solution in ABS material for cabinet and panel work where a consistent edge detail is needed. The 15/16 x 1mm ABS CP41399 EMB LAC 600FT specification identifies this product as an ABS edgebanding sized for covering typical 3/4 inch panel edges with overhang for trimming. The 1mm thickness provides a solid edge profile compared to thinner options, which helps maintain a clean line after trimming and flushing operations. The 15/16 inch width allows some working margin during application, so the edge can be trimmed back for a precise finish. The 600FT length designation indicates this is suited to production runs or multiple cabinet jobs from a single roll, supporting continuous workflow on edgebanding equipment.
The 15/16X1MM ABS CP41399 EMB LAC 600FT description specifies a 15/16 inch wide, 1mm thick ABS edgebanding, which aligns with covering standard panel edges while leaving trim allowance on both sides for flush cutting. That width is sized to span a nominal 3/4 inch core and still permit trimming for a clean, square finish. The 1mm thickness behaves as a more substantial band, which supports controlled trimming and scraping operations after application. The 600FT length designation indicates that the roll is oriented toward longer production runs, which helps maintain a consistent setup on edgebanding machinery across cabinet parts within the same project.
This product is classified in the Miscellaneous|Edgebanding category and identified as Edge Banding, which positions it for use on exposed panel and cabinet edges where a finished edge is required. The 15/16X1MM ABS CP41399 EMB LAC 600FT specification provides a size and material profile that suits edge treatment on casework, shelving, and similar panel components using ABS banding. The 15/16 inch width aligns with edge coverage on panels built around common thickness cores, giving fabricators a band that extends past each face for trimming. The 1mm thickness in the description supports producing a defined edge that reads as a solid band once it has been flushed and finished with typical shop processes.
The combination of 15/16 inch width and 1mm thickness specified in the SAP description helps deliver repeatable outcomes when running this ABS banding through edgebanding equipment. That width gives consistent overhang on both sides of the panel, which supports predictable trimming passes and reduces adjustments between parts with the same core thickness. The 1mm thickness works as a stable cross-section for trimming and scraping, helping the cutting tools track cleanly along the edge without the fragile feel of very thin tape. The 600FT length designation supports longer, uninterrupted runs, which allows an operator to maintain the same setup and feed characteristics across many parts. The clear Rehau ABS edgebanding 315431-230 identifier, including manufacturer part number 315431-230, gives shops a precise reference, which allows repeat ordering of the same size and material profile for future jobs that need matching edge details.
Rehau ABS edgebanding 315431-230 is identified as 15/16X1MM, meaning it is approximately 15/16 inch wide and 1mm thick, which suits covering typical 3/4 inch panel edges with trim allowance.
The 1mm thickness described in 15/16X1MM ABS CP41399 EMB LAC 600FT provides a more substantial band, which supports controlled trimming and scraping and gives a solid-looking finished edge.
The SAP description states 600FT, indicating the roll provides 600 feet of ABS edgebanding, which suits longer production runs or multiple cabinet projects from a single roll.
The product is described as ABS in 15/16X1MM ABS CP41399 EMB LAC 600FT, indicating the banding uses ABS material for the edge profile on panels and cabinets.
The 15/16 inch width provides coverage beyond a nominal 3/4 inch core, allowing both faces to be trimmed back to flush for a clean, square edge line.
The manufacturer part number 315431-230 identifies this specific Rehau ABS edgebanding configuration, helping shops reorder the same width, thickness, and material profile for repeat jobs.
Rehau ABS edgebanding 315431-230, specified as 15/16X1MM ABS CP41399 EMB LAC 600FT, provides an ABS band sized for typical panel edges with trim allowance and a 600-foot length for ongoing cabinet or panel production. The Edge Banding classification and defined dimensions align this product with shop workflows that rely on ABS banding for consistent, repeatable edge treatment. For work that calls for a 15/16 inch wide, 1mm thick ABS edge solution from Rehau, this 315431-230 configuration matches that requirement.
Sold In: 1 Roll