Rehau ABS edgebanding 315431-231 is an ABS edge banding product designed to finish exposed edges on board materials. The 15/16 inch width covers standard panel thickness with some overhang for trimming, which supports a clean, straight final edge. The 1mm thickness gives a solid band that can handle normal machining without feeling flimsy during application. The ABS material provides a consistent profile along the full length, which helps maintain an even line when running cabinets or casework in sequence. The CP60573 EMB LAC designation identifies a specific decorative and lacquered surface, so finished edges visually match the intended board surface. Supplied in a 600 foot length, this Rehau, Inc. edgebanding supports longer production runs or multiple cabinet jobs from a single roll, which reduces changeovers and helps keep workflow steady.
This Rehau ABS edgebanding uses a 15/16 inch width, giving coverage that spans the panel face with a slight overage, which simplifies setup for trimming operations. The 1mm thickness sits in a practical range for everyday shop equipment, so the band feeds predictably through typical edgebanders or manual application tools. ABS as the base material offers a stable working edge along the roll, which helps the tape stay aligned against the substrate during bonding. The defined CP60573 EMB LAC surface identifies the decorative and lacquered design used, so the installer can match it to the coordinated board program during layout. With a total of 600 feet per roll, this edge banding supports both small batches and larger production jobs without frequent material changes, which helps keep machine downtime low.
This Rehau ABS edgebanding, classified as edge banding within the edgebanding category, is suited to finishing exposed edges on cabinets, furniture, and similar board-based projects. The 15/16 inch width covers standard panel edges with workable excess, which is useful on melamine, laminate, or similar sheet goods where a slight overhang is trimmed back. With a 1mm thickness, the band creates a defined edge line that blends well with typical carcass and door constructions, without adding unnecessary bulk. The ABS material supports normal routing or trimming steps after bonding, which is important when running multiple parts and aiming for visually aligned edges across a set of cabinets or casework components.
The combination of 15/16 inch width and 1mm thickness in this ABS edgebanding helps produce consistent edges from part to part, because the material presents a predictable profile to the trimmer. The CP60573 EMB LAC surface identification ties the band to a specific decorative and lacquered look, which matters when matching doors, drawer fronts, and cabinet sides within the same design scheme. As an ABS edge banding from Rehau, Inc., the product is engineered as part of a known edgebanding line, which supports repeat ordering of the same color and finish using the 315431-231 part number. The 600 foot roll length allows an installer or shop to process long runs of panels using a single material reference, which simplifies inventory handling and helps maintain visual consistency across larger installations.
Rehau 315431-231 is an ABS edgebanding classified as edge banding, so it is used to finish and protect exposed edges on cabinet or furniture panels.
This ABS edgebanding is 15/16 inch wide and 1mm thick, giving useful coverage and a solid edge profile for trimming and finishing operations on panel projects.
The Rehau ABS edgebanding 315431-231 roll length is 600 feet, which supports extended cabinet or furniture production runs with one continuous material reference.
CP60573 EMB LAC identifies a specific decorative and lacquered surface for this ABS edge banding, so edges visually coordinate with the associated board design.
This ABS edge banding is manufactured by Rehau, Inc., a brand identified for this 315431-231 edgebanding within the Wurth Baer Supply assortment.
The 1mm thickness provides a stable, manageable band that runs cleanly through typical edgebanding equipment, supporting smooth trimming and a defined finished edge.
This Rehau ABS edgebanding 315431-231 combines a 15/16 inch width, 1mm thickness, and CP60573 EMB LAC decorative surface, so cabinet and furniture edges align with coordinated board designs. With 600 feet per roll and a clearly defined manufacturer part number, it supports repeatable results and straightforward reordering for ongoing shop work.
Sold In: 1 Roll