Rehau ABS edgebanding 315431-235 15/16 x 1mm

Rehau ABS Edgebanding 315431-235 For Clean Edges

Rehau ABS edgebanding 315431-235 is an ABS edge banding product that covers and finishes raw panel edges, so cabinet and furniture projects present a uniform, professional edge instead of exposed core material. The 15/16 inch width gives coverage over standard panel thickness with a bit of tolerance, which helps during trimming and flush routing. The 1mm thickness provides a substantial edge profile, supporting clean machining at the bench or on an edgebander. The ABS material defines this as a thermoplastic edgeband, so it can be worked with typical ABS-capable equipment used in woodworking shops. The CP41392 EMB LAC identification distinguishes this specific décor and surface texture within the Rehau line, which matters when matching existing jobs or coordinating across multiple components in the same project.

Key ABS Edgebanding Details That Support Work

• The 15/16 inch width covers standard sheet-goods edges with room for slight overhang, which then trims back to a flush, straight line along cabinet or fixture runs.
• The 1mm thickness defines a solid edge profile that machines predictably, helping routers and trimmers track without chattering along the edge.
• The ABS material construction sets this banding up for use with processes and tooling designed around ABS edgebanding, which keeps shop setups consistent across projects.
• The CP41392 EMB LAC designation identifies a specific finish and embossing style in the Rehau range, so matching to other components using the same code stays straightforward.
• The manufacturer part number 315431-235 gives a precise reference when reordering, which reduces ordering errors between similar colors or textures.
• The SAP description referencing 600FT indicates an extended length, which supports longer production runs or multiple projects under one part reference.

ABS Edge Banding Details For Practical Installation

This Rehau ABS edgebanding uses a 15/16 inch width, which provides workable overhang on common panel thicknesses during installation, so flush trimming can follow the edge accurately. The 1mm thickness interacts well with typical trimming and routing operations, helping blades engage the material without grabbing. Identifying the product as ABS edgebanding signals that it is suited to processes and glue systems configured for ABS, streamlining machine or hand setups that already run this material type. The CP41392 EMB LAC designation keeps the installer aligned with the intended décor and emboss, which matters when installing adjacent doors, drawer fronts, and panels that share the same visual specification.

How This Rehau ABS Edgebanding Fits Shop Work

Where Rehau ABS Edgebanding 315431-235 Is Applied

This Rehau, Inc. ABS edgebanding, classed as edge banding and categorized under edgebanding, is intended for finishing exposed edges on panel components in woodworking projects. The 15/16 inch width positions it for use on panel edges where a slight overhang is preferred during processing, covering the substrate across doors, drawer fronts, cabinet sides, or similar assemblies. Its identification as ABS edgebanding places it among materials commonly run on automatic edgebanders or installed by hand on casework and furniture parts. The CP41392 EMB LAC description marks it as a specific style within the Rehau ABS line, supporting consistent appearance where multiple parts share this same coded finish.

Why These Size And Material Details Matter In Use

The 1mm thickness of this edge banding offers a defined edge that responds predictably to trimming knives and router bits, which helps maintain a straight, chip-resistant edge along the length of a part. The 15/16 inch width gives a balance between coverage and waste, leaving just enough excess to trim cleanly without excessive removal during processing. Being specified as ABS means the material behavior under heat and cutting is consistent with other ABS bands in the shop, which supports repeatable setups and consistent results across production runs. The manufacturer part number 315431-235 and the CP41392 EMB LAC designation provide clear identifiers when coordinating color and surface with other components or future replacements, which helps maintain visual continuity on installed work.

Common Questions About Rehau ABS Edgebanding 315431-235

Selecting This ABS Edgebanding For Your Next Run

Choosing this Rehau ABS edgebanding 315431-235 brings a defined 15/16 inch by 1mm size, ABS material, and the CP41392 EMB LAC designation into your edge-finishing work. These specifics support consistent machining, visual alignment, and repeatable ordering when planning cabinet or furniture production.