Rehau ABS edgebanding 315431-237 is ABS edge banding designed to finish exposed panel edges, so cabinet and furniture parts gain a consistent, protected edge surface. The 15/16 inch width covers typical panel thickness with a little margin, which helps installers trim flush without exposing substrate. The 1mm thickness gives a solid edge profile, so routed or filed edges stay substantial rather than feeling thin. The ABS material forms a durable plastic edging, so panel corners have a uniform, machinable edge instead of raw board. The CP41383 embossed lacquer description identifies a textured, lacquered surface, so the visible edge presents a finished look that complements laminated or coated panels. Supplied as a 600 foot length, this edgebanding supports longer production runs, so shops can process multiple jobs from a single roll before changing material.
This Rehau, Inc. ABS edgebanding is defined as 15/16 x 1mm, so it suits edge applications where standard panel thickness needs full coverage and some overhang for trimming. The 1mm profile works well in workflows using common edgebanders or manual trimmers, because the band has enough body to track reliably through feed systems and respond predictably to trimming tools. The ABS material responds well to typical edge-banding processes, so it integrates into shop routines for finishing cabinet components, shelving, and other panel-based assemblies that call for a plastic edge strip.
The 15/16 inch width on this Rehau ABS edge banding allows coverage of common panel thickness while leaving slight overhang, so installers can trim back to the board and leave a straight, flush edge. Because the band is 1mm thick, it offers more presence than very thin tape-style edging, so finished panels have an edge that visually matches other 1mm treatments used in cabinet work. The ABS plastic body works with standard edge-banding routines on panel products, so cabinet sides, shelves, and door edges move from raw substrate to a consistent finished profile in the same pass. The CP41383 embossed lacquer surface contributes a defined texture and lacquered finish, so the edge reads as a designed surface rather than an unfinished strip, which matters where edges sit at eye level.
The 1mm ABS edgebanding thickness helps trimming equipment register cleanly against the band, so flush-trim cutters or end trimmers can follow the edge without tearing through to the substrate during passes. Because the band is ABS, the material provides a predictable cut when scraped, routed, or filed, so installers can refine edges and corners to match surrounding panels. The embossed lacquer finish is engineered into the CP41383 designation, so the surface treatment remains uniform along the roll length, supporting consistent appearance from part to part in a run. With 600 feet on a roll, sequence work across cabinet boxes and fronts stays on a single lot of material, which supports visual continuity when a project uses this specific edging throughout.
Rehau ABS edgebanding 315431-237 is specified as 15/16 inch wide and 1mm thick, which suits edging applications that need full panel coverage with enough material for clean trimming.
The CP41383 embossed lacquer description indicates a textured, lacquered surface on the ABS band, so the finished edge presents a defined look that coordinates with decorative panel faces.
The 1mm thickness on this ABS edgeband provides a solid profile for routing or trimming, so finished edges remain substantial and visually consistent across cabinet and furniture parts.
The 15/16 inch width gives coverage beyond standard panel thickness, so installers can run the band slightly proud and trim back to achieve straight, flush edges.
The ABS construction creates a durable plastic edging, so exposed panel cores gain a uniform, machinable barrier along edges used in cabinet and furniture projects.
The 600 foot roll length allows multiple components and projects to be edged from one roll, so production runs proceed with consistent material across many parts.
Rehau ABS edgebanding 315431-237 brings a 15/16 inch by 1mm ABS profile with CP41383 embossed lacquer finish, so exposed panel edges gain a defined, textured, lacquered surface. With 600 feet per roll supporting extended runs, this edge banding fits cabinet, furniture, and panel projects where a plastic edging is specified for consistent appearance along every finished edge.
Sold In: 1 Roll