Rehau ABS edgebanding 315431-254 is an ABS edge banding from Rehau, Inc. that provides a defined edge to panels, so cabinet and furniture projects gain a finished perimeter instead of exposed core. The product belongs to the edgebanding category, so it functions as the trim material that covers raw panel edges in woodworking builds. The SAP description lists 15/16 x 1mm dimensions, which gives a working width suited to covering common panel thickness while keeping a slim, controlled edge line for consistent visual results. The same description identifies the material as ABS, so the banding is based on a thermoplastic formulation that supports typical edgebanding fabrication processes in cabinet shops. The 600FT reference in the description denotes a substantial length, which supports longer production runs or multiple projects from the same product number without frequent changeover.
The SAP description lists the edgebanding as 15/16 x 1mm, so installers work with a band that sits just under 1 inch wide and a defined 1mm thick profile, which supports reliable trimming while keeping an edge that does not dominate the panel face. This dimensional pairing matters in the shop because it gives enough material for edge coverage and light post-processing while staying thin enough for clean transitions at corners and returns. The identification of ABS material means the banding aligns with ABS-oriented edge processing, so fabricators can plan cutting and machining steps around a known thermoplastic behavior during normal edgebanding operations.
The product class is listed as edge banding, so this Rehau ABS edgebanding 315431-254 is intended for use on exposed panel edges in woodworking environments. The category reference to edgebanding places it among materials used to finish cabinet, furniture, or similar panel-based builds, so it functions wherever a raw core edge needs a matching or coordinating band. The 15/16 x 1mm sizing supports application along typical panel thicknesses, letting installers align the strip with the edge and then trim back to the face, which keeps the working steps in line with common shop edgebanding routines. The 600FT length suits repeated edge runs across multiple panels, so a single product number can support consistent edging throughout a coordinated installation.
The ABS designation in the SAP description defines the banding as an acrylonitrile butadiene styrene product, so it behaves as a thermoplastic edge material that aligns with standard ABS-focused machining practices in cabinet and furniture shops. This matters during trimming and finishing because installers can expect a stable 1mm profile that responds predictably when shaved or flushed back to the panel face. The 15/16 inch width offers coverage beyond the edge thickness of many panel constructions, giving some margin for alignment while still minimizing waste during cutting. The manufacturer part number 315431-254 links these traits under a single identifier, so when a shop selects this number they tap into the same ABS composition, dimensional profile, and run length each time they specify this edge banding for repeat work.
Rehau ABS edgebanding 315431-254 is identified as ABS in the SAP description, so it is an acrylonitrile butadiene styrene edge material suited to standard ABS edgebanding machining workflows.
The SAP description lists 15/16 x 1mm, so the banding provides a width just under 1 inch and a 1mm thickness for covering panel edges and allowing trimming back to the surface.
The description specifies 600FT, giving a length suited to edging multiple panels or larger runs while maintaining material consistency across a project.
The product class is edge banding, so it is used to cover exposed panel edges in cabinet, furniture, or similar woodworking projects where a finished perimeter is required.
The 1mm thickness referenced in the description offers a defined edge that supports trimming and shaping while remaining slim enough for clean transitions at corners and panel faces.
The manufacturer part number 315431-254 identifies this specific Rehau ABS edgebanding configuration, tying together its ABS material, 15/16 x 1mm size, and 600FT length for consistent reordering.
Rehau ABS edgebanding 315431-254 combines ABS material, 15/16 x 1mm sizing, and a 600FT length under a single part number, so shops can align projects around a consistent edge solution. For panel-based cabinet, furniture, or similar builds that call for a defined finished edge, this ABS edge banding offers a repeatable way to cover exposed cores with a stable, 1mm profile. When a job spec or internal standard points to this exact Rehau identifier, selecting this edgebanding keeps the material, dimensions, and roll length matched to that requirement.
Sold In: 1 Roll