Rehau ABS edgebanding 315431-255 is a 15/16 inch wide, 1mm thick ABS edge banding that caps exposed panel edges to protect them and create a finished look. The ABS construction provides a defined, uniform edge along the full run, which supports consistent alignment with cabinet doors, drawer fronts, or casework. The CP41440 embossed lacquer surface adds a textured lacquered finish on the banding, so the edge presents a specific decorative pattern and sheen that can visually tie into matching surfaces. The embossed lacquer layer also creates a continuous coated face on the edge, giving the working edge a predictable surface for everyday cabinet use. With a 600 foot length, the edgebanding supplies long, uninterrupted runs, which reduces splice points on a job and supports repetitive production runs or multiple pieces from a single roll.
This Rehau ABS edgebanding uses a 15/16 inch width, giving installers extra coverage past common panel faces to allow post-trimming for a precise final edge. The 1mm thickness sets a clear material gauge, so edgebanding equipment and trimming tools can be dialed in to that specific thickness. The ABS composition defines the band as an ABS product, so setups can be organized around that substrate type when planning machining passes. The 600 foot roll length offers substantial continuous material, which supports longer setups at the edgebander without frequent roll changes and keeps edge profiles consistent from the first part to the last.
Rehau ABS edgebanding 315431-255 belongs in cabinet and woodworking applications where a 15/16 inch wide edge band is appropriate for covering exposed panel edges. The 1mm thickness suits projects that call for a solid-feeling edge rather than a thin tape, allowing the edge to read as a defined band on cabinets, shelves, or casework. Because it is ABS edge banding, it aligns with setups already geared to running ABS material, such as edgebanders configured for this substrate. The CP41440 embossed lacquer finish positions this banding for projects that use that particular decorative code, so finished edges visually coordinate with matching CP41440 embossed lacquer panels or components. With a 600 foot roll, the product serves both production shops and larger projects that require consistent edging across many parts.
The defined 15/16 inch width provides a predictable overhang on typical panel thicknesses, giving operators enough material to trim back while maintaining full face coverage. The 1mm gauge contributes to repeatability, because edgebanding equipment can be set up once for that thickness and run multiple parts with the same cutting and trimming profile. The ABS composition keeps the product in a known material family, which helps standardize heat, feed, and trimming approaches around ABS characteristics during processing. The CP41440 embossed lacquer surface creates a uniform decorative layer across the roll, so each cut length presents the same pattern and lacquered appearance, supporting visual consistency from cabinet to cabinet. The 600 foot length also reduces roll changes, which limits transitions that could otherwise affect alignment or finish continuity during a production run.
Rehau ABS edgebanding 315431-255 is 15/16 inch wide and 1mm thick, so it covers standard panel edges with extra material for trimming to a clean, flush finish.
The CP41440 embossed lacquer surface gives the ABS edgebanding a specific textured lacquered finish, so cabinet edges visually coordinate with materials using the same CP41440 finish code.
The 600 foot length supplies long continuous runs of edgebanding, so production lines can handle extended cabinet runs with fewer roll changes and consistent results.
This product is identified as ABS edgebanding and ABS edge banding, so it fits workflows that are already set up for processing ABS edging material.
A 1mm thick ABS edgeband serves cabinet and casework projects needing a more substantial edge, so the finished panel edge feels solid and visually defined.
The 15/16 inch width provides overhang beyond typical panel thicknesses, so trimming tools can remove excess while keeping full edge coverage and a straight profile.
Rehau ABS edgebanding 315431-255 pairs a 15/16 inch width with 1mm thickness to deliver a substantial, trimmable ABS edge for cabinet and woodworking projects. The CP41440 embossed lacquer finish aligns the edging with that specific decorative code, which supports clean visual transitions between panels and edges. With a 600 foot roll length, the product suits both shop production runs and larger installations that rely on consistent edge appearance from part to part. For work built around ABS edge banding and CP41440 embossed lacquer surfaces, this Rehau edgeband provides the dimensions and finish needed for precise, repeatable results.
Sold In: 1 Roll