Rehau ABS edgebanding 315431-256 is an ABS edge banding product designed to finish and protect raw panel edges, giving cabinet and furniture projects a consistent appearance around all exposed sides. The 15/16 inch width covers typical 3/4 inch panels with clearance, so the banding can be trimmed back to a tight, flush edge without leaving substrate showing. The 1mm thickness provides a defined edge profile that resists everyday knocks better than very thin tape, which helps panels hold their finished look in regular use. The CP41441 EMB LAC designation identifies a specific surface and lacquered finish, so matching existing runs that use this code stays repeatable across jobs. Supplied under Rehau, Inc. branding and the 315431-256 part number, this edge banding ties directly to shop drawings and material lists that call out this exact specification.
This edge banding is specified at 15/16 inch wide, so it spans typical 3/4 inch panels with extra material on both faces for trimming back to a sharp, consistent line. The 1mm thickness establishes a clear, measurable edge that coordinates with typical 1mm ABS edgebanding setups in the shop, which helps keep trimming, routing, and sanding passes consistent from panel to panel. Being an ABS edge banding, it is intended to be applied along exposed panel edges so the raw core is covered by a continuous surface. The defined combination of width and thickness lets fabricators plan machine settings, trimming passes, and sequence of operations with a known edge profile in mind.
This Rehau ABS edgebanding is categorized under Edge Banding, positioning it for use on the exposed edges of cabinetry, furniture, and other panel-based assemblies that call for ABS material. The 15/16 inch width suits work built from nominal 3/4 inch sheet goods, so installers and shop crews can run parts knowing the banding covers the edge with room to trim without leaving the substrate visible. The 1mm thickness provides enough material to form a defined edge that coordinates with common ABS-based layouts, helping panels look uniform when installed side by side. Because the CP41441 EMB LAC code and 315431-256 part number define a specific surface and finish combination, this edge banding aligns well with projects where the same reference needs to follow the job from cut list through final install.
The specified 15/16 x 1mm dimension set is important for keeping machining and finishing repeatable across a run of parts. The extra width beyond the core panel thickness means edgebanded parts can be processed with standard trimming equipment while maintaining a narrow, uniform reveal along door and drawer gaps. The 1mm thickness creates a stable edge that responds predictably during trimming and light sanding passes, which reduces the chances of rolling the edge over or cutting through to the panel. Working with an ABS edgebanding in this known size helps shops coordinate their edge application, trimming, and finishing steps so parts using the 315431-256 banding stay visually consistent from the first piece to the last.
Rehau ABS edgebanding 315431-256 has a 15/16 inch width, allowing coverage of standard 3/4 inch panels with extra material for trimming to a clean, flush edge.
This ABS edge banding is 1mm thick, creating a defined edge profile that works well with common trimming setups and supports a solid-feeling finished edge.
The CP41441 EMB LAC code designates a specific finished surface version of this edgebanding, which supports visual consistency when the same reference is used throughout a project.
The 15/16 inch width overshoots 3/4 inch panels, giving margin to trim both faces back and produce a crisp, uniform edge without exposing the core material.
A 1mm ABS edgebanding thickness offers a substantial edge that stands up to typical handling while matching standard 1mm tooling and setup expectations in many shops.
The 315431-256 manufacturer part number provides a precise reference, helping future reorders or project extensions match the same edgebanding specification.
The Rehau ABS edgebanding 315431-256 combines a 15/16 inch width with a 1mm ABS profile, giving panel projects a clear, repeatable edge dimension that aligns with typical 3/4 inch work. The CP41441 EMB LAC designation and specific part number connect directly to documented specifications, which supports consistent results across matching runs. For shops and installers needing an ABS edge banding with these dimensions and reference codes, this product provides a defined option for building uniform cabinet and furniture edges.
Sold In: 1 Roll