Rehau ABS edgebanding 315431-337 15/16 x 1mm

Rehau ABS Edgebanding 315431-337 For Clean Edges

Rehau ABS edgebanding 315431-337 is ABS edge banding that covers and protects exposed board edges, so cabinet and furniture projects get a finished look that holds up in service. This Rehau, Inc. edge banding is part of the Rehau ABS edgebanding line, giving shops a consistent material choice across jobs. The 15/16 inch width is sized to cover common 3/4 inch panels with overhang, allowing trimming back to a precise edge. The 1mm thickness builds a solid edge profile that stands up where thin tape edges are not preferred. The ABS construction provides a uniform, machinable surface for trimming and flushing. The 600FT length in the SAP description supports longer runs, so casework, closets, or multiple cabinets can be processed from one continuous roll on an edgebander.

Key ABS Edgebanding Details For Shop Workflows

• The 15/16 inch width spans typical 3/4 inch panel faces with allowance for overhang, which helps achieve a clean flush-trimmed edge in a single pass on standard equipment.
• The 1mm thickness builds a more substantial edge than thin tape, which supports a defined profile at the edge that sands and finishes consistently with the surface.
• The ABS material described as ABS in the SAP line provides a plastic edge that machines predictably and resists chipping during trimming, which supports smooth edges on case parts.
• The Rehau ABS edgebanding brand identity gives shops a consistent product reference, which helps match material across repeat jobs and maintain the same appearance line-to-line.
• The SAP description reference to 600FT signals a long-run format, which allows extended production runs on an edgebander without frequent material changeovers between cabinets.

Edgebanding Dimensions That Support Installation

This edge banding uses a 15/16 inch width and 1mm thickness, so it covers typical 3/4 inch case parts with workable overhang for edge trimming. The ABS construction suits standard edgebanders and trimmers, so shop workflows can apply and trim this banding in the same passes used for other ABS materials. The combination of width and thickness gives an installer room to flush-trim while keeping a solid-feeling edge, so doors, drawer fronts, and cabinet boxes present a consistent finished edge after machining.

Using Rehau ABS Edgebanding 315431-337 In Projects

Where This ABS Edgebanding Fits Best

This Rehau ABS edgebanding sits in the Miscellaneous Edgebanding and Edge Banding product class, so it suits projects that call for applied edge treatment on board materials. The 15/16 inch width aligns with cabinet and furniture parts cut from 3/4 inch stock, where a small overhang is preferred for post-trimming. The 1mm thickness described in the SAP line makes this banding a good fit for casework needing a sturdier edge than thin tape, such as cabinet sides or shelf fronts that see repeated handling. Because the product is identified specifically as Rehau ABS edgebanding 315431-337, it can be matched by that part number when the same edge appearance is needed again on future runs.

Details That Help Repeatable Edgebanding Results

The combination of ABS material and 1mm thickness provides a uniform edge that responds predictably to trimming and scraping, which supports repeatable results from part to part. The 15/16 inch dimension stated in the SAP description gives workable excess over 3/4 inch panels, so operators can run standard trimming settings without chasing short edges. The long-run 600FT reference supports continuous feeding on an edgebander, which reduces interruptions during cabinet or closet production and helps hold consistent heat and pressure settings across many parts. The clear identification as Rehau ABS edgebanding and Manufacturer Part # 315431-337 simplifies reordering by exact part, which supports consistent edge appearance across replacement components and later add-on cabinets that must line up visually with existing work.

Common Questions About Rehau ABS Edgebanding 315431-337

Choose This ABS Edge Banding For Consistent Edges

Rehau ABS edgebanding 315431-337 provides a 15/16 inch by 1mm ABS edge treatment that supports clean, repeatable results on 3/4 inch panels. The long-run 600FT format and clearly defined part number simplify shop planning and reorders when consistent edge appearance matters across cabinet or furniture projects.