Rehau ABS edgebanding 315592-037 is an ABS edge banding from Rehau, Inc. that provides a finished edge solution for panels in cabinet, furniture, or millwork projects where an ABS strip is specified. The 15/16 inch width lets this ABS LE C600185 EMB LAC 600FT material cover standard panel thicknesses while giving a small overhang for trimming, which supports accurate flush-edge finishing. The 1.2mm thickness gives the banding a substantial profile, which helps create a defined edge line that stands up to day-to-day contact on working surfaces. The ABS material construction makes this edgeband suitable wherever an ABS product is part of the job spec, supporting consistent material selection across the project. The manufacturer part number 315592-037 clearly identifies this exact Rehau ABS edgebanding variant, which helps match existing work or repeat an established shop standard.
The 15/16 inch dimension on this Rehau ABS edgebanding gives generous coverage for typical engineered wood panels, which helps installers align the strip with minimal effort before trimming back to a flush face. The 1.2mm thickness provides enough material to machine, scrape, or sand to the final profile, which supports controlled finishing without cutting through the band. The ABS LE C600185 EMB LAC 600FT configuration keeps the physical characteristics consistent along the run, which helps maintain a uniform edge appearance from panel to panel on the same project.
This Rehau ABS edge banding is identified as 15/16X1.2MM ABS LE C600185 EMB LAC 600FT, which ties the product directly to applications calling for ABS LE material in the C600185 embossed lacquer specification. The 15/16 inch width suits edge treatment on cabinet cases, shelving, and similar panel constructions where a near-1 inch band is preferred, which helps match the edge to common carcass thicknesses. The 1.2mm thickness works well on vertical and horizontal edges that receive hand contact, because the thicker banding presents a defined edge transition. The Rehau, Inc. branding and the 315592-037 part number allow shops to align this banding with other Rehau-specified components in the same job, which supports consistent sourcing for recurring designs.
The ABS LE C600185 EMB LAC 600FT description signals a specific ABS LE configuration with an embossed lacquer surface identified as C600185, which lets production teams tie this edge banding directly to job drawings or material lists calling out that exact code. The defined 15/16 inch by 1.2mm profile makes machine setup predictable, because feed speeds and trimming passes can be dialed in around a known band thickness. Using a single Rehau ABS edgebanding specification across a run, anchored by the 315592-037 identifier, helps maintain batch-to-batch consistency when panels are processed at different times. This consistency reduces edge variation from cabinet to cabinet, which supports a uniform finished appearance in larger installations.
Rehau ABS edgebanding 315592-037 is specified as 15/16X1.2MM, giving a 15/16 inch wide band at 1.2mm thickness for covering panel edges and trimming to a flush finish.
The ABS LE C600185 EMB LAC 600FT description indicates ABS LE material in the C600185 embossed lacquer configuration supplied in a 600-foot length, tying directly to that specific finish and texture requirement.
The 1.2mm thickness of this ABS edge banding provides enough material for trimming, scraping, or sanding, which supports a controlled flush edge without cutting through the band.
Rehau ABS edge banding with part number 315592-037 lets shops reference the same specification every time, which helps maintain consistent edge appearance on recurring cabinet or furniture runs.
A 15/16 inch ABS band like this is suited to cabinet, shelving, or panel edges near 3/4 inch thickness, providing slight overhang for trimming to a clean, straight edge.
The Rehau, Inc. branding on this ABS edgebanding ties it to a defined manufacturer source, which supports consistent supply for projects that standardize on this specification.
This Rehau ABS edgebanding 315592-037, specified as 15/16X1.2MM ABS LE C600185 EMB LAC 600FT, delivers a defined size and surface configuration that supports repeatable edge work. The combination of 15/16 inch width and 1.2mm thickness allows panels to be processed with predictable trimming and finishing results. The clear 315592-037 identifier and C600185 designation keep material selection tied to a precise specification, which helps align shop production with drawings and established standards. For projects built around ABS LE C600185 EMB LAC, this edge banding provides a focused option that fits directly into that material set.
Sold In: 1 Roll