Rehau ABS edgebanding 315592-059 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges on cabinets, furniture, and fixtures so cut edges match the project design and protect the substrate in daily use. The 15/16 inch width covers standard panel thicknesses with room to trim, which helps installers flush-trim cleanly without exposing core material. The 1.2mm thickness gives a more substantial front profile than thin tape, which supports a solid look on doors and casework edges. The ABS material provides a uniform, machinable edge that works well with common trimming and routing setups, so workflow stays consistent across runs. The LE C600677 EMB LAC designation identifies a specific embossed lacquer appearance, which helps shops keep color and texture consistent from job to job when repeating the same program.
The 15/16 x 1.2mm ABS edgebanding format fits applications where the edge band slightly overhangs before trimming, which supports tight visual alignment after machining. On typical panel edges in cabinetry and furniture, the width gives enough margin for standard edgebander or hand trimmer passes, helping reduce visible glue lines at the finished edge. The 1.2mm thickness works well when a more substantial edge is desired, so the profile reads closer to a solid component rather than a thin tape. By pairing the specific LE C600677 EMB LAC code with the known dimensions, shops can plan both fit and appearance together, coordinating panel programs and edgebanding setups around this exact band.
This Rehau ABS edgebanding sits in the miscellaneous edgebanding and edge banding category, so it suits a range of cabinet and furniture projects that call for an ABS edge solution. The 15/16 inch width makes it practical for edging standard thickness casework sides, shelves, and doors where a slight overhang is trimmed back for a flush finish. The 1.2mm thickness supports use on higher-visibility fronts, such as door edges or exposed verticals, where a more pronounced edge profile is preferred. Because it is an ABS edge banding from Rehau, Inc., it fits workflows that already use ABS-based edges in similar applications. The LE C600677 EMB LAC designation and the 315592-059 part number allow fabricators to tie this exact band to specific finishes specified in project documents.
The defined 15/16 inch width matters because it lets operators set edgebander or hand-trim processes knowing there is enough material to flush back without risking reveal of the substrate, which supports efficient passes with consistent visual results. The 1.2mm thickness matters when dialing in trimming and corner rounding, since the added material gives a clear, solid-feeling edge profile that can stand up better to machining on doors and fronts. The ABS material type supports consistent cutting and routing behavior, which helps maintain tool settings across multiple batches of work. The LE C600677 EMB LAC reference gives specifiers and shop leads a stable code for finish selection, so they can call out this exact appearance on drawings and reuse it on follow-up orders. The manufacturer part number 315592-059 then anchors purchasing and inventory to the same edge band, reducing mix-ups between similar-looking rolls during busy production schedules.
Rehau 315592-059 is an ABS edge banding that finishes exposed panel edges, so cabinet and furniture components present a clean, matched perimeter instead of raw substrate.
This ABS edgebanding is 15/16 inch wide and 1.2mm thick, allowing overhang for trimming while creating a more substantial finished edge profile on doors and casework.
The 1.2mm thickness gives a thicker front edge, which supports a solid look and helps trimming and corner shaping feel more controlled on visible cabinet fronts.
LE C600677 EMB LAC identifies a specific embossed lacquer appearance, so finish selection and repeat orders can reference a consistent visual code.
The manufacturer part number 315592-059 links drawings, purchase orders, and inventory to this exact edgeband, reducing confusion between similar finishes.
This 15/16 x 1.2mm ABS edge banding suits cabinet and furniture edges where a flush-trimmed, more substantial profile is desired on visible panels and doors.
This Rehau ABS edgebanding, identified as 315592-059 with dimensions of 15/16 x 1.2mm, provides a defined format for edging cabinet and furniture panels. The LE C600677 EMB LAC designation ties the band to a specific embossed lacquer appearance, supporting consistent finish selection across projects. By specifying this exact ABS edge banding in drawings and orders, shops align machining setups, visual results, and material records around a single, stable reference for recurring work.
Sold In: 1 Roll