Rehau ABS edgebanding is an edge banding product from Rehau, Inc. that finishes the exposed edges of sheet goods, so cabinet and furniture parts present a uniform look instead of raw core material at the perimeter. The 15/16 inch width stated in the description gives coverage over standard 3/4 inch panels with a small overhang, which allows trimming back to a flush, precise edge during fabrication. The 1.2mm thickness described in the product data provides a substantial edge profile compared with thin tapes, which supports machining a more solid-feeling edge on doors, drawer fronts, and casework. The ABS material identified in the description is a common thermoplastic for edgebanding, so it works with established ABS-oriented shop processes. The long roll length indicated in the description supports extended runs on edgebanders, which reduces changeovers on repetitive cabinet or component jobs.
The SAP description specifies a 15/16 inch by 1.2mm ABS edge banding format, which directly affects installation setup on an edgebander or hand-application station. The 15/16 inch width gives edge coverage beyond the face of standard 3/4 inch panels, so trimmers and scrapers can be set for a light pass to bring the band down flush without risk of under-trimming the face. The 1.2mm thickness in the description results in a more pronounced edge than ultra-thin tape, so edgebanding pressure settings, feed speeds, and trimming heads can be tuned for this heavier profile in repeatable production.
The manufacturer part number 315592-062 and edge banding classification identify this product as a dedicated edging solution for casework and furniture components, so it fits naturally into cabinet shops that rely on ABS banding across carcasses, doors, and drawer parts. The 15/16 inch width stated in the SAP description lets operators run this band on standard 3/4 inch panels while maintaining a small overhang for trimming, so the machine setup supports a consistent flush edge across panels, shelves, and verticals. Because the material is ABS as specified, shops that already process ABS edges can treat this band like other ABS lines in their system, so gluing, trimming, and post-processing steps remain aligned with existing programs and tooling choices.
The 1.2mm thickness indicated in the product data creates a sturdier edge compared with thin tape-style bands, so door and drawer front edges present a more solid profile in everyday cabinet use. That thickness gives a visible, defined edge line after trimming, so designers who specify this edgebanding can count on a consistent visual band around fronts and panels. The extended roll length referenced in the description supports longer production runs on edgebanders before roll change, so batch work for kitchens, office build-outs, or furniture components can proceed with fewer interruptions for material handling.
The precise 15/16 inch width and 1.2mm thickness called out in the SAP description let shops document machine settings for this exact Rehau ABS edgebanding, so repeat orders can drop into established edgebander programs without re-development time. With the material defined as ABS, temperature and feed parameters tuned for ABS edges carry directly to this product, so operators can rely on stable glue behavior and trimming responses during long runs. The product class designation as edge banding clarifies that this material is intended for panel edges rather than broad surfacing, so layout and cutting plans can reserve this roll specifically for edging operations.
The manufacturer part number 315592-062 uniquely identifies this version within Rehau offerings, so purchasing and production teams can consistently call out the same band for follow-on jobs or warranty work. The long roll format mentioned in the description keeps more lineal feet of edging available at the machine, so production schedules can align this material with sequences that favor continuous runs, limiting downtime linked to material changeover on the edgebander.
The Rehau ABS edgebanding width listed as 15/16 inch gives coverage over standard 3/4 inch panels, providing a small overhang that supports clean trimming back to a flush finished edge.
The ABS edgebanding thickness of 1.2mm creates a more substantial edge profile, allowing light profiling or sanding while still leaving a solid-feeling edge on doors and panels.
This Rehau ABS edgebanding is classified as edge banding, so it is used to finish exposed panel edges in cabinets and furniture, replacing raw substrate with a consistent edge surface.
The material is specified as ABS, which aligns with ABS-focused edgebanding processes, so shops can use ABS-oriented gluing, trimming, and finishing setups with this product.
The description indicates a long roll length, which keeps more lineal feet at the machine, reducing roll changes during extended edgebanding runs on multi-cabinet or component batches.
The manufacturer part number 315592-062 uniquely identifies this specific 15/16 inch by 1.2mm ABS edgebanding, helping purchasing and production call out the exact same material for repeat jobs.
This Rehau ABS edgebanding, defined in the SAP description as 15/16 inch by 1.2mm ABS edge banding, aligns with workflows centered on edging standard panel thicknesses. The combination of stated width, thickness, and ABS material supports consistent trimming and finishing on cabinet and furniture components. When projects call for ABS edges and a defined edge profile, the part number 315592-062 points directly to this specific band so estimating, purchasing, and production reference the same edging choice across jobs.
Sold In: 1 Roll