Rehau ABS edgebanding 315592-075 is ABS edge banding specified as 15/16 x 1.2mm, so it is sized to cover typical 3/4-inch panel edges with extra width for trimming, helping installers deliver a uniform, professional edge line. The ABS material defines it as a thermoplastic edging suited to modern cabinet and casework construction where a consistent synthetic edge is required. The SAP description lists LE C600772, which ties the banding to a specific design reference, supporting consistent visual matching across multiple panels on a job. The same description notes EMB LAC, indicating an embossed, lacquered surface that provides a defined texture and sheen, giving fabricated components a finished appearance directly off the edgebander. The 600FT reference identifies a continuous length that supports longer production runs and reduces changeovers during cabinet or fixture fabrication.
The 15/16 x 1.2mm sizing published for this Rehau ABS edge banding defines both its coverage and profile, giving installers enough material to square and flush edges reliably. The ABS material and stated thickness create a predictable edging body, which supports repeatable trimming and scraping results across multiple parts. The LE C600772 identification links this edgebanding to a specific design family, useful when aligning panel faces and edges within the same project. The EMB LAC note describes an embossed, lacquered surface, providing a finished look as it exits the edgebander and reducing post-processing around the edge line.
This product is classified as edge banding in the Miscellaneous|Edgebanding category, placing it directly in cabinet, furniture, and general casework applications where exposed panel edges need a finished treatment. The 15/16-inch width works with panels around 3/4 inch thick, giving coverage past the face and back to allow trimming equipment to create a clean, square edge. The 1.2mm thickness provides a noticeable edge layer, which suits doors, drawer fronts, shelves, and vertical panels where a defined edge profile is desired. The ABS construction gives a uniform synthetic edge around panel perimeters, so fabricated components present the same material from one cabinet to the next. With LE C600772 specified, this edgebanding connects to a coordinated surface reference, supporting projects that repeat the same look across banks of cabinets or store fixtures. The EMB LAC designation adds an embossed, lacquered surface to this profile, positioning it for use where both edge texture and sheen need to align with chosen panels.
The 15/16 x 1.2mm dimensioning helps edgebanders grip, apply, and trim the band consistently, which reduces rework from undersized edges or exposed substrate. A 1.2mm ABS body gives trimmers and scrapers enough material to form a smooth transition to the panel face, supporting a solid-feeling edge on cabinet doors and cases. The ABS composition means the roll maintains the same material behavior from start to finish, so once feed speed and heat levels are tuned, production runs can proceed with consistent results. The LE C600772 code ties every roll of this item to the same visual specification, which matters when aligning multiple fronts or panels in the same line of cabinetry. EMB LAC, describing an embossed, lacquered surface, provides texture and sheen during application, helping the edge immediately present as a finished component. The 600FT continuous length allows longer runs of matching cabinets or fixtures under one setup, supporting steady workflow and uniform appearance across the job.
Rehau ABS edgebanding 315592-075 is specified at 15/16 x 1.2mm, giving coverage for typical 3/4-inch panels with extra width for trimming to a flush, square edge.
Rehau 315592-075 edge banding is described as ABS, providing a consistent thermoplastic edge material suited to modern cabinetry and casework fabrication.
The LE C600772 reference ties this ABS edgebanding to a specific design code, helping projects maintain a consistent look across multiple panels and cabinet components.
The EMB LAC description indicates an embossed, lacquered surface, giving the edge defined texture and sheen so parts present a finished appearance after application.
The 1.2mm thickness provides a substantial edging layer that trims and scrapes cleanly, supporting a solid, well-defined edge profile on cabinet and casework components.
The 600FT length supplies a long, continuous run of the same ABS edgebanding, supporting extended cabinet or fixture production with a single material setup.
The Rehau ABS edgebanding 315592-075 combines a 15/16 x 1.2mm profile, ABS construction, and an EMB LAC surface tied to LE C600772, giving cabinet shops a defined edging solution that aligns dimension, material, and appearance for repeatable project work.
Sold In: 1 Roll