Rehau ABS edgebanding gives you an ABS-based edge banding solution identified as part number 315592-088, so you get a clearly defined product when matching existing jobs or specifying new work. The ABS material in this edge banding creates a uniform edge treatment, which supports consistent appearance across cabinets, fixtures, or panels. The 15/16 inch width described as 15/16X1.2MM shapes the banding to cover standard panel thicknesses, helping conceal core material and cut quality along exposed edges. The 1.2mm thickness in the same description defines a substantial edge profile, which affects how the edge feels in hand and how it responds to trimming operations. The LE C100163 reference in the SAP description provides a specific design or finish code within the Rehau system, giving you a repeatable way to align this edgebanding to a known look on repeat or repair jobs.
The 15/16X1.2MM sizing in the SAP description defines both width and thickness, which shapes how this edgebanding sits on common panel edges and how much trim margin is available after application. The 15/16 inch width provides coverage beyond typical nominal panel thicknesses, which leaves working room for flush trimming without exposing the substrate. The 1.2mm thickness establishes the edge build, which influences scraper settings, trimmer setup, and the final edge radius or profile you cut into the band. The ABS reference defines the material type, which guides expectations for trimming, scraping, and finishing steps as you integrate this banding into established shop workflows.
The listing as Edgebanding and Edge Banding positions Rehau ABS edgebanding 315592-088 for use on exposed panel edges in woodworking and similar projects, where a finished perimeter is needed. The 15/16X1.2MM ABS LE C100163 EMB LAC 600FT description places this product in applications that call for ABS edge treatment in that specific size and design reference, giving you a defined match when coordinating with existing cabinetry or architectural millwork standards. The 15/16 inch width supports work on panels where coverage beyond the core thickness is necessary, so you can process doors, drawer fronts, or case parts to a uniform finished width. The 1.2mm thickness works in situations where a more substantial edge is desired than ultra-thin tape, contributing to an edge that feels more pronounced once trimmed and shaped.
The precise description 15/16X1.2MM ABS LE C100163 EMB LAC 600FT provides a fixed combination of material, size, and design code, which supports repeatability when specifying this edgebanding across multiple jobs or phases. The 15/16 inch width paired with 1.2mm thickness gives predictable stock for edgebanders and trimmers, which helps maintain consistent setup from run to run and reduces adjustments between batches using the same part. The ABS material reference defines how the edge responds to trimming knives and scrapers, which allows process parameters to remain stable when this same item number is used. The specific manufacturer part number 315592-088 connects the shop floor material directly to design documents or ordering systems, which helps align estimating, purchasing, and production around a single identifiable edgebanding choice.
Rehau ABS edgebanding 315592-088 is described as ABS in the SAP description, so it is based on ABS material, which affects trimming behavior and the way the finished edge feels on cabinets or panels.
Rehau ABS edgebanding 315592-088 uses the 15/16X1.2MM description to indicate its width and thickness, which defines edge coverage and the amount of material available for trimming during installation.
Rehau ABS edgebanding 315592-088 lists 600FT in the SAP description, which represents the length designation and influences how many linear feet of panel edge can be handled from one item number.
Rehau ABS edgebanding 315592-088 uses LE C100163 as part of its SAP description, indicating a specific design or finish reference within the Rehau catalog for consistent appearance matching.
Rehau ABS edgebanding 315592-088 with 1.2mm thickness provides a defined edge build, which affects scraper setup, trimming passes, and the tactile feel of the finished cabinet or panel edge.
Rehau ABS edgebanding 315592-088 uses manufacturer part number 315592-088, which links shop use directly to documentation and helps keep reorders aligned with the original specified edge band.
Rehau ABS edgebanding 315592-088 combines ABS material with a 15/16X1.2MM size and the LE C100163 EMB LAC 600FT description, giving you a clearly identified edge banding choice. Selecting this part number aligns panel edge finishing with a documented material, size, and design reference that supports consistent cabinet and panel production.
Sold In: 1 Roll