Rehau ABS Edgebanding 315593-029 For Clean Panel Edges

Rehau ABS edgebanding 315593-029 provides an ABS edge banding solution identified by manufacturer part 315593-029, giving installers a specific match when a job spec calls out this exact code. The ABS material stated in the SAP description defines it as a thermoplastic edging, so it works as a dedicated trim layer between raw board edges and the surrounding environment. The 15/16 inch width noted as 15/16 in the description covers typical panel thicknesses up to that size, allowing the band to fully span the edge and leave material for flush trimming. The 1.2mm thickness specified in the SAP description adds a measurable layer over the substrate, which supports a more defined edge profile after trimming. The SAP description also lists LE C100142 LAC, giving shops a precise finish and design reference so replacement or continuation jobs can follow the same visual line.

Key ABS Edgebanding Details That Support Shop Workflow

• The 15/16 inch width from the SAP description lets the banding extend past common panel faces, so installers can trim back to a straight line without exposing the core during finishing passes.
• The 1.2mm thickness stated in the SAP description creates a solid edging layer, which helps the edge hold its profile when routed or sanded during fabrication steps.
• The ABS material called out in the SAP description defines a consistent thermoplastic substrate, giving fabricators a predictable response to cutting and trimming tools on repeat runs.
• The LE C100142 LAC identifier in the SAP description ties this edgebanding to a specific look reference, helping shops align multiple pieces on the same project to that designation.
• The 328FT length noted in the SAP description provides a continuous run on a single roll, reducing mid-project roll changes when edging multiple parts to the same Rehau specification.

Edgebanding Size And Roll Format For Installation Planning

The 15/16 inch width listed in the SAP description sets the coverage band for this Rehau ABS edge banding, so installers can align it along panel edges with enough overhang for trimming on both faces. The 1.2mm thickness also specified in the SAP description determines how much material stands proud of the substrate before machining, which affects cutter depth setup when flush trimming and profiling. The 328FT roll length mentioned in the SAP description defines the continuous footage available in one roll, helping shops plan how many edges and parts they can run to this same specification on a single job.

Using Rehau 315593-029 ABS Edgebanding In Woodworking

Where This 15/16 x 1.2mm ABS Edge Banding Fits

The SAP description places this product in the Edge Banding product class and identifies it as ABS, so it is suited for applications where a dedicated edging material finishes exposed board edges. The 15/16 inch width from the SAP description positions it for edges on panels up to that width, giving coverage that can be trimmed back to align with the face surfaces. The 1.2mm thickness noted in the description means the edging forms a defined layer at the edge, which allows a visible transition from face material to banding while still sitting close to the face plane. The LE C100142 LAC designation in the SAP description marks a particular Rehau design reference, so projects built to that code can carry the same edging reference across doors, drawer fronts, and panels.

Why These Rehau ABS Details Support Consistent Results

The manufacturer part number 315593-029 ties every roll of this ABS edge banding to the same specification, helping shops repeat earlier projects or replace damaged parts with the same coded material. The 328FT length specified in the SAP description allows long, uninterrupted runs on edgebanders, which helps keep color and finish flow consistent from piece to piece across a job. The combination of 15/16 inch width and 1.2mm thickness from the SAP description provides a known edge geometry, so tooling, trimming, and routing setups can be standardized around this size. The ABS material identified in the description offers a uniform thermoplastic body, which supports clean cuts and predictable trimming behavior across the entire listed length.

Common Questions About Rehau ABS Edgebanding 315593-029

Select Rehau ABS Edgebanding 315593-029 For Matched Jobs

The Rehau ABS edgebanding 315593-029 description defines a 15/16 inch wide, 1.2mm thick ABS edge banding in a 328FT length with LE C100142 LAC designation, giving shops a clear specification when a project calls for that exact coded edging.