Rehau ABS edgebanding identifies this product as an ABS-based edge banding from Rehau, Inc., so it is designed to cover and finish exposed panel edges in woodworking projects where an ABS material is specified. The 15/16 inch width stated in the description gives enough coverage for typical panel thicknesses that match this size, helping you fully cover the edge without leaving substrate exposed. The 1.2 mm thickness noted in the product description defines the material build, which supports a substantial edge layer when an application calls for this thickness profile. The designation LE C100249 in the description ties this banding to a specific Rehau reference, helping match it visually and technically with panels or layouts keyed to the same code. The 600 ft length in the description provides a long continuous run, which reduces changeovers on repetitive cabinet or component runs.
The 15/16 inch width specified in the product description sets the span of coverage at the edge, which helps align this banding with panels designed for that width so trimming remains minimal after application. The 1.2 mm thickness listed in the SAP description defines how far the material stands proud before final flush trimming, which matters when setting trimmer setups or balancing the edge feel with adjacent surfaces. Because it is identified as ABS edge banding, the material type is matched to applications where ABS edgeband is called out in shop standards or design notes. The 600 ft length noted in the description supports longer continuous runs, which can streamline feeds through edgebanders when many like-sized parts are processed in sequence.
The category listing as Edgebanding and Edge Banding defines this product as a finishing component for panel edges, fitting into woodworking projects that specify Rehau ABS material around visible perimeters. The 15/16 inch width in the SAP description aligns with common panel dimensions that are edged on one face, allowing this banding to cover the edge with some margin for trimming without oversizing it excessively. The 1.2 mm thickness stated for this ABS banding suits layouts that call for a thicker edge profile than ultra-thin tape, which affects how pronounced the edge feels and how it lines up with doors, drawer fronts, or casework components. The LE C100249 reference in the description connects this banding to a defined Rehau code, which supports visual and material consistency wherever that code is specified across panels and coordinated trim pieces.
The ABS designation in the web and SAP descriptions identifies the plastic base material, so it can be matched with adhesive systems and machining setups that are already proven for ABS edge banding in a given shop. The manufacturer part number 315593-040 provides an exact identifier for this specific banding, aiding repeat orders so future runs use the same width, thickness, and LE C100249 reference without variation that could affect fit across projects. The 600 ft length described gives a clear measure of how much edging is available per roll, which supports planning part counts and cut lists so jobs are grouped logically around a known material quantity. The association with Wurth Baer Supply through the web description WBSC - 1432 - RU315593-040 ties this Rehau banding to a distributor focused on woodworking products, which can simplify sourcing when shops standardize around this edge treatment for cabinets, fixtures, or furniture lines.
Rehau ABS edgebanding 315593-040 is an ABS edge banding classified as Edge Banding, so it is intended to finish and protect exposed panel edges in woodworking projects using this material type.
This ABS edge banding has a stated width of 15/16 inch and a thickness of 1.2 mm, giving a defined edge profile that matches drawings or standards calling for that size combination.
The Rehau 315593-040 ABS edgebanding is specified at 600 ft in length, supporting longer production runs and planning of multiple parts from a single continuous supply.
This 15/16 x 1.2 mm ABS edgebanding is manufactured by Rehau, Inc., which identifies the source brand and supports consistent selection when projects specify Rehau ABS edge materials.
The LE C100249 reference in the SAP description ties this banding to a specific Rehau designation, helping align it with panels or layouts that use the same internal code reference.
The manufacturer part number 315593-040 provides a precise identifier, so purchasing and production can call out the same ABS edgebanding consistently across jobs and reorders.
This Rehau ABS edgebanding from Wurth Baer Supply combines a specified 15/16 inch width, 1.2 mm thickness, and 600 ft length, giving shops a clearly defined edge profile tied to manufacturer part 315593-040 for repeatable panel edge treatments.
Sold In: 1 Roll