Rehau ABS edgebanding 315608-026 is a Rehau, Inc. edge banding product designed to finish raw panel edges with a consistent ABS strip. The 15/16 inch width covers typical board thickness while giving a slight overhang for trim flush, which helps produce straight, clean edges on cabinets and casework. The 1.2mm thickness provides a defined edge profile that stands out more than thin tape, supporting a solid feel along door and panel edges. ABS material creates a uniform surface along the band, which helps maintain an even appearance from piece to piece across a run. The 600ft length described in the SAP data keeps a long continuous run available, which reduces changeovers on repetitive jobs and supports efficient production in the shop.
The SAP description "15/16X1.2MM ABS LE CP20940 EMB LAC 600FT" defines this Rehau, Inc. edge banding as a 15/16 inch wide, 1.2mm thick ABS strip supplied in a 600ft length, which suits extended cabinet or panel runs. The edge banding format gives installers enough width to position the strip accurately on the substrate and then trim back to the panel faces, supporting reliable alignment on straight edges. The 1.2mm thickness works with common trimming and flush-cut tools, which helps maintain control during finishing passes along the edge line. The extended length helps maintain consistent material along a series of parts, which is valuable when producing matching components within a project.
This Rehau ABS Edgebanding, 315608-026, is identified in the product data as an edge banding under the Edgebanding category, aligning it with panel-edge finishing tasks in woodworking. The ABS material designation in the SAP description means the strip is intended for use wherever an ABS edging solution is specified, helping shops match this product to ABS-based projects. The 15/16 inch width suits applications where the substrate thickness and required overhang fall within that coverage, such as many cabinet sides, shelves, and fronts. Its 1.2mm thickness situates it in the thicker edging range compared to thin tape, which works well on areas where a more substantial edge profile is desired, such as higher-visibility cabinet and furniture components.
The defined 15/16 inch by 1.2mm size in the SAP description gives installers a predictable cross-section, which makes machine setups and manual trimming procedures more repeatable from part to part. With 600ft noted for length, a single roll can run through many edges before material change, which supports consistent color and texture continuity along a full job when matched within the same product number. The combination of ABS material and fixed thickness helps machines respond consistently during flush trimming, which can reduce edge variation on long runs. Using the same Rehau ABS Edgebanding, 315608-026 part number across matching components supports uniform edge appearance, which is important when doors, drawer fronts, and panels are viewed together in finished installations.
Rehau ABS Edgebanding, 315608-026 is an ABS edge banding from Rehau, Inc. categorized as Edgebanding, which means it is used to finish and protect exposed panel edges in woodworking projects.
Rehau ABS Edgebanding, 315608-026 is described as 15/16 inch by 1.2mm, providing enough width to cover the panel edge with trim allowance and a thickness suited to a defined but manageable edge profile.
The SAP description indicates a 600ft length, giving shops a long continuous run, which supports extended cabinet or panel edging work with fewer roll changes during production.
Rehau 315608-026 edge banding is identified as ABS in the SAP description, which provides a uniform thermoplastic edging suited to consistent machining and trimming in woodworking applications.
The 1.2mm thickness offers a more pronounced edge than thin tape, which supports a solid-feeling edge on cabinet fronts and panels while remaining workable with standard trimming tools.
The 15/16 inch width covers common panel thicknesses with slight overhang, which lets installers trim both faces flush and achieve straight, consistent edges on casework components.
Rehau ABS Edgebanding, 315608-026 from Wurth Baer Supply pairs a defined 15/16 inch by 1.2mm size with a 600ft length, giving shops a consistent ABS edge solution for extended runs. The clear dimensional description helps align this edging with panel thickness needs and trimming setups, while the long roll format supports uninterrupted production on cabinets and casework. When a project calls for ABS edge banding with this size profile and continuous length, this Rehau, Inc. edge banding part number offers a straightforward way to keep edges uniform across your work.
Sold In: 1 Roll