Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding gives cabinet and furniture panels a finished edge using ABS material identified by manufacturer part number 315608-094, so you can match this specific product in drawings, cut lists, or reorder notes without confusion on the job.
The SAP description "15/16X1.2MM ABS LE CP20997 EMB LAC 600FT" specifies the edgebanding as approximately 15/16 inch wide and 1.2 mm thick, which suits edging standard panel thicknesses where this width covers the substrate and slight overhang for trimming, helping achieve a flush, professional edge line.
The 600FT designation indicates a continuous 600-foot length, which supports longer production runs, reduces time spent changing rolls, and helps maintain color and texture consistency across large projects that share the same edge profile and finish.
The description segment "LE CP20997 EMB LAC" distinguishes this edgebanding as a particular design and finish variant within Rehau ABS offerings, so shops can align this exact band with the corresponding laminate or surface specification when consistent appearance across parts is required.
The 15/16 inch width in the "15/16X1.2MM" description gives enough coverage for common board thicknesses while leaving slight overhang, which lets installers trim back to a flush edge and maintain a straight visual line along cabinet and furniture work.
The 1.2 mm thickness works as a defined edge profile, giving room for trimming tools to work without cutting through the band, which supports repeatable results when running multiple panels through the same setup and helps preserve a consistent edge radius.
The 600-foot roll length supports extended edging sessions without frequent changeovers, which keeps machine settings stable over more parts and helps reduce variation that might appear when swapping to short rolls mid-run.
The category listing as Edgebanding and Product Class as Edge Banding define this Rehau ABS edgebanding as trim for panel edges, so it fits workflows where raw substrate edges on cabinets, furniture, or other panel-based assemblies need a defined, finished appearance.
The 15/16 inch width suits edging panels where the band must cover the full edge height with slight overhang, which is useful on casework and shelving where exposed substrate on either face would be visible and compromise the finished look.
The 1.2 mm thickness supports applications where a more pronounced edge profile is preferred over ultra-thin tape, which helps panels feel more substantial at the touch point and allows minor shaping at the edge without losing the band.
The ABS material reference allows this edgebanding to integrate into ABS-focused shops, where cutters, trimmers, and heat settings are already aligned to ABS behavior, supporting consistent results across different ABS edge colors and designs that share similar construction.
The "LE CP20997 EMB LAC" designation identifies a specific decorative and surface combination within the Rehau range, so it fits projects that call out this design in their specifications, helping installers align the edge appearance with matching surfaces in the same environment.
The defined 15/16 inch by 1.2 mm sizing documented in the SAP description helps shops dial in edgebander guides and trimming settings once for this product, which reduces setup time and supports repeatable cuts when processing multiple batches using 315608-094.
The 600FT continuous length supports higher part counts from a single roll, which reduces mid-run interruptions, helping maintain consistent heat, feed, and trim settings and lowering the chance of visual variation that might occur when swapping between shorter lengths.
The specific Rehau identifier 315608-094 gives purchasing and production a single reference point, which simplifies reordering and reduces the risk of mixing similar-looking bands from different series that might not match the intended design or finish.
The structured description "ABS LE CP20997 EMB LAC" marks this band as a defined finish variant, which helps drafting and estimating teams map this edge directly to design documents, supporting accurate material planning and alignment with the chosen decorative surface.
The classification under Miscellaneous|Edgebanding signals that this product is purpose-built as edging rather than a general trim, which helps teams route it directly into edgebanding stations and workflows without additional sorting or repurposing steps.
The brand reference Rehau, Inc. ties the edgebanding to a recognized manufacturer of edge solutions, which assists in coordinating this band with other Rehau-specified components on a project where consistent sourcing and documented part numbers are important for repeat work.
Rehau 315608-094 edgebanding is identified as 15/16X1.2MM, giving an approximate 15/16 inch width and 1.2 mm thickness, which supports full edge coverage with material left for trimming.
Rehau 315608-094 edgebanding is described as ABS, so it works in ABS-focused edging workflows using tools and settings aligned to ABS characteristics.
Rehau 315608-094 edgebanding is listed as 600FT, providing a 600-foot length that supports longer production runs with fewer roll changes.
Rehau 315608-094 is categorized as Edgebanding and Edge Banding, so it is used on panel edges in cabinet, furniture, and similar panel-based constructions.
The 1.2 mm thickness gives enough material for trimming and light edge shaping, supporting a solid-feeling edge without cutting through the band.
The 315608-094 part number uniquely identifies this specific ABS LE CP20997 EMB LAC variant, helping projects match the intended design and finish.
The Rehau ABS edgebanding designated as 315608-094, with dimensions 15/16X1.2MM and a 600FT length, provides a clearly specified edge solution for panel work where consistent sizing, material, and finish are essential across multiple parts.
The ABS LE CP20997 EMB LAC description defines this edgebanding as a particular variant within Rehau offerings, supporting projects that call out this exact design and helping shops align edging with design documentation when planning and executing repeatable work.
Sold In: 1 Roll