Rehau ABS edgebanding 315608-100 is an ABS edge banding product designed to finish exposed edges so panels present a clean, uniform edge line across a run. The SAP description identifies this as 15/16 x 1.2mm ABS edgebanding, giving you an edge strip sized for typical panel thickness where a near full-overlay edge is needed. The ABS material provides a defined, consistent edge profile that supports a professional appearance along cabinet or furniture edges. The description string "LE CP60486 EMB LAC" designates a specific visual and surface combination within the Rehau range, so matched runs can maintain the same look over different jobs using this exact code. The 600 ft length noted in the SAP description provides an extended run from a single product, which supports continuous production on multi-cabinet or multi-panel projects without frequent roll changes.
The 15/16 inch width listed in the SAP description gives coverage beyond standard panel thickness, allowing an installer to trim back to a flush face while still protecting the substrate edge. This extra coverage supports accurate alignment on slightly out-of-square or varied panels because the banding overhang can be trimmed to correct the final line at the edge. The 1.2mm thickness specified in the description creates an edging layer that holds a clear profile when trimmed, which is important when working panels that will see handling along doors, drawer fronts, or shelf edges. Together, the specified width and thickness give a defined interface between the face material and the edge, supporting a consistent finished dimension across a bank of cabinets or casework.
This product is classified as edge banding in the edgebanding category, positioning it for use wherever a raw panel edge must be covered to complete a cabinet, furniture, or similar woodworking assembly. The ABS material identified in the description supports use on panel-based constructions that rely on a thermoplastic edge to finish cut sides, ends, or tops. The 15/16 inch width and 1.2mm thickness from the SAP description suit edges on panels where a nearly full overlay is desired, such as doors or case ends that align visually in a run. The LE CP60486 EMB LAC code within the description defines a specific appearance variant, which is useful when an installer wants the same edge look across multiple rooms or projects by re-ordering this exact part number.
The 600 ft length stated in the SAP description gives a continuous supply for extended production, which supports consistent results because the same product lot can be used across a full project. This continuity matters when lining up cabinet banks or larger furniture assemblies where edge color and surface must track from piece to piece. The 15/16 inch width and 1.2mm thickness work together to create a predictable trimming allowance at the router or edge trimmer, which reduces variability in final edge reveal from one panel to the next. The manufacturer part number 315608-100 directly ties to this exact ABS LE CP60486 EMB LAC specification, so using this code aligns future orders with the same thickness, width, and appearance for maintenance, additions, or phased installations that must match the original work.
Rehau ABS edgebanding 315608-100 is described as 15/16 x 1.2mm, providing a width suitable for panel edges and a thickness that supports a defined trimmed edge profile.
The description string LE CP60486 EMB LAC identifies a specific ABS edgebanding variant, so projects using this code can repeat the same visual and surface combination over time.
The 600 ft length in the SAP description provides extended run capacity, allowing long sequences of cabinet or panel edging without frequent material changes.
Part number 315608-100 is classified as edge banding within the edgebanding category, aligning it with products used to finish exposed panel edges.
The 1.2mm thickness noted in the description gives a substantial ABS layer that maintains a consistent edge appearance after trimming and final finishing operations.
The 15/16 inch width provides coverage beyond common panel thicknesses, creating a trim margin that supports flush alignment and clean edges across a run.
The defined SAP description of 15/16 x 1.2mm ABS LE CP60486 EMB LAC 600FT ties this Rehau ABS edgebanding directly to a known size, material, and visual variant. Using part number 315608-100 aligns cabinet or furniture edge work with a specific ABS edge banding that maintains consistent width, thickness, and appearance from project to project. For jobs that rely on repeatable edge lines and a matched look across multiple installations, this clearly identified ABS edge banding offers a precise specification to work from when planning and executing panel-based construction.
Sold In: 1 Roll