Rehau ABS edgebanding provides an ABS edge banding solution for finishing exposed cabinet and panel edges using 15/16 inch wide material, so you can cover typical 3/4 inch substrates with overhang for trimming and a clean finished edge on site or in the shop. The 1.2mm thickness specified in the SAP description gives a substantial edge profile, which supports a more solid feel at door and panel perimeters during everyday use. The ABS material called out in the web description identifies a plastic-based edge, which works well where you want a consistent surface around laminate or similar faces. The manufacturer part number 315608-116 ties this specific banding to jobs that require this exact match, helping you maintain visual continuity across replacement or expansion work. The Wurth Baer Supply listing under edge banding class keeps this product aligned with professional woodworking workflows.
The 15/16 inch width called out in the SAP description provides extra coverage beyond common 3/4 inch panel thickness, which gives you room to align the banding and trim both faces flush after bonding. The 1.2mm thickness specified for this Rehau ABS edgebanding affects trimming and scraping, because the thicker profile responds well to standard edge trimmers while still giving a defined radius or square edge depending on your tooling. The ABS material identified in the product data works with typical edgebanding workflows where you apply, trim, and finish the edge in a single sequence. The 600ft roll length noted in the SAP description supports longer uninterrupted runs, which helps reduce changeovers on automatic equipment or between manual edging steps on larger projects.
The SAP description listing this product as 15/16 x 1.2mm ABS positions it well for cabinet and casework built from 3/4 inch material, because the width and thickness support a durable edge along doors, shelves, and vertical panels. The edge banding product class in the Wurth Baer Supply catalog indicates its role as a finishing component, so it fits into woodworking projects where raw panel edges need a matching or coordinated edge treatment. The LE CP20989 notation within the SAP description ties the banding to a defined decor reference, which is useful when a project specification calls for that specific designation across both flat panels and edges. The 600ft length further supports multi-piece work such as full kitchen runs or commercial casework, because you can process many parts with the same lot of material.
The 1.2mm thickness referenced in the SAP description provides more material at the edge than very thin bands, which supports consistent trimming and scraping without cutting through during normal processing. This thickness also helps maintain a clear edge line along doors and drawer fronts, which can improve the perceived precision of the finished installation. The 15/16 inch width specified for this Rehau ABS edgebanding creates a predictable overhang on both faces of a 3/4 inch panel, simplifying alignment on edgebanders or during manual application because the band can be centered and then trimmed back. The Rehau brand identified in the product data connects the edgeband to a recognized manufacturer in edge banding, which supports jobs where the project documentation cites this exact supplier and part number 315608-116 for continuity. The Wurth Baer Supply listing under miscellaneous edgebanding signals that this product is part of a broader woodworking supply range, which helps integrate it into established shop material lists and reorder routines.
Rehau 315608-116 ABS edgebanding is identified in the SAP description as 15/16 inch wide and 1.2mm thick, which suits edging work on typical 3/4 inch panels with material left for trimming.
The 1.2mm thickness noted in the SAP description provides a substantial edge that responds well to trimming and scraping, helping maintain a defined profile along cabinet and panel edges.
The LE CP20989 reference in the SAP description ties this ABS edgeband to a specific decor designation, supporting projects that require matching that identified finish across panels and edges.
The SAP description specifies a 600ft length, which supports long production runs or larger jobs where many components share the same ABS edge treatment.
This ABS edgebanding, defined as 15/16 x 1.2mm in the SAP description, aligns with work using 3/4 inch panels where a thicker decorative edge is desired around cabinet and casework parts.
The manufacturer part number 315608-116 uniquely identifies this Rehau ABS edgebanding, helping maintain consistency when matching existing jobs or meeting specified project documents.
The Rehau ABS edgebanding defined by SAP description 15/16 x 1.2mm ABS LE CP20989 EMB LAC 600FT offers a clearly specified size and decor reference, which supports projects where you need consistent edges across multiple panels. The 15/16 inch width and 1.2mm thickness align with common 3/4 inch cabinet and panel construction, giving you workable overhang and a solid edge profile during processing. With manufacturer part number 315608-116 and classification as edge banding from Wurth Baer Supply, this product fits into professional woodworking jobs that call for an identified ABS edge solution ready for regular shop workflows.
Sold In: 1 Roll