Rehau ABS edgebanding 315608-139 is an ABS edge banding product from Rehau, Inc. that provides a dedicated, uniform strip for covering exposed substrate edges on projects that match its size and look, giving cabinets and panels a finished appearance at the edge. The 15/16 inch width stated in the description gives coverage beyond a typical 3/4 inch panel thickness, allowing trimming back to a clean line without exposing the core. The 1.2 mm thickness noted in the SAP description creates a substantial edge profile compared with thin tape, which helps the edge read more like a solid component on doors, drawer fronts, and casework. The ABS material called out in the product name defines it as a non-PVC thermoplastic edgeband, so installers can pair it with projects that are already specified around ABS edgebanding materials.
The 15/16X1.2MM sizing from the SAP description anchors both edge coverage and machine setup, so operators can dial in banders, trimmers, or hand tools to those dimensions for repeatable edges. Using a 15/16 inch band over common panel thicknesses leaves enough extra material for clean flush trimming without leaving gaps. The 1.2 mm thickness works with typical edgebanding equipment that is set for this gauge, helping maintain consistent pressure and trimming behavior along the entire edge length. Because the product class is Edge Banding, shops can treat this Rehau part as a standard banding input in their workflow, loading it where a 15/16 inch, 1.2 mm ABS edge strip is required.
The category Miscellaneous|Edgebanding and product class Edge Banding position Rehau ABS edgebanding 315608-139 for projects that need finished edges on panels, doors, or shelves built around sheet goods. The 15/16 inch width from the SAP description gives edge coverage suitable for many panel-based components, letting installers place the band so it overhangs both faces before trimming back. On cabinet runs, this width helps ensure that small panel variances still end with a fully covered edge. The ABS material called out in the product name aligns with shop environments that run ABS-focused programs, so cutters, edge banders, and finishing steps can be selected around that specific material behavior. As a Rehau, Inc. product, this banding fits into workflows already using Rehau edgebanding lines where part number matching keeps finishes and profiles consistent across multiple pieces.
The SAP description 15/16X1.2MM ABS LE CP21012 EMB LAC 600FT defines both the running length and the cross-section, which directly affects how the edgeband performs during installation. A 1.2 mm thickness lets trimming and scraping operations shape a defined edge radius or crisp corner, since there is more material to work than with very thin banding. This thickness also supports edges that feel more substantial in hand along doors and drawer fronts. The 15/16 inch width gives room to center the band on the panel and still maintain full coverage after trimming, which helps reduce rework where undersized banding would expose the core. Because the product is explicitly classified as Edge Banding under the Rehau ABS edgebanding, 315608-139 name, shops can map this format to specific edgeband stations or programs whenever a 15/16 inch, 1.2 mm ABS strip is required for a consistent finish.
Rehau ABS edgebanding, 315608-139 is identified in the product class as Edge Banding, so it serves as a strip used to finish and cover exposed panel edges on cabinet and woodworking projects.
The SAP description lists 15/16X1.2MM, meaning the edgebanding has a nominal width of 15/16 inch and a thickness of 1.2 mm, which guides equipment setup and trimming expectations.
The product name and SAP description both specify ABS, identifying this as ABS edgebanding, which lets shops align it with projects specified for ABS materials.
The 600FT value in the SAP description indicates a long-run format, supporting extended edging sequences on multiple components without frequent material changeovers during production.
The stated 1.2 mm thickness provides enough material for trimming and light profiling, so finished edges can feel more substantial and maintain a defined transition on cabinet and panel work.
The 15/16 inch width specified in the description provides coverage beyond many standard panel thicknesses, allowing installers to trim back to a flush, fully covered edge without exposing the core.
Rehau ABS edgebanding 315608-139 combines a 15/16 inch width, 1.2 mm thickness, and ABS construction in an Edge Banding format that fits panel-based cabinet and woodworking projects. The 600FT length supports extended runs where multiple parts share the same edge detail. Using the specific manufacturer part number 315608-139 keeps ordering and job specifications tied to this exact Rehau, Inc. product, helping maintain visual and dimensional consistency whenever the same edge treatment is required on repeat work.
Sold In: 1 Roll