Rehau ABS edgebanding 315608-145 15/16 x 1.2mm

Rehau ABS Edgebanding For Finished Cabinet Edges

Rehau ABS edgebanding gives you an ABS edge banding option in the 315608-145 color, so you can finish panel and cabinet edges with a matching material across your run. The ABS construction provides a consistent synthetic edge material, which supports clean machining on typical woodworking equipment. The 15/16 inch width covers standard panel thicknesses with margin, helping you trim back to a flush, professional edge after bonding. The 1.2mm thickness creates a substantial edge profile, which helps reduce telegraphing of the substrate while giving the edge a solid look once trimmed. The CP20985 designation identifies the specific décor match, which matters when you are tying this edgeband to coordinated board or laminate in the same program. The embossed and lacquered finish provides a textured and sealed surface, so the edge visually ties into textured boards while staying easy to wipe down in normal shop and cabinet environments.

Key Details That Support Edge Banding Work

• The 15/16 inch width gives you overhang on typical board thickness, which lets you align the tape quickly and then trim both faces back cleanly in one pass.
• The 1.2mm thickness provides a robust edging layer, which helps the edge stand up to normal handling while giving routers and trimmers enough material to cut without chattering.
• The ABS material keeps the profile uniform along the 600 foot length, which supports consistent heat and pressure settings on edgebanders throughout longer production runs.
• The CP20985 décor code ties this edgeband to a specific finish family, which helps keep color and pattern alignment consistent across doors, drawer fronts, and casework edges.
• The embossed surface gives a textured feel that tracks with structured board faces, which helps the edge avoid looking flat against a pronounced grain or pattern on the panel.
• The lacquered finish seals the embossed surface, which supports a finished appearance on installation and a surface that is straightforward to wipe during routine use.

Edgeband Size And Finish For Straightforward Fit

This Rehau ABS edgebanding in size 15/16 x 1.2mm is dimensioned for common casework and cabinet work, so it fits standard panel thicknesses with trimming allowance. The 1.2mm thickness behaves like a traditional thick edge, which works well with common edgebanding equipment and handheld trimmers in the shop. The embossed, lacquered surface is already finished, which avoids separate finishing steps on the edge and lets the profile move directly from edgebander to trimming and installation. The 600 foot length supports longer runs, which means fewer changeovers during repetitive cabinet or panel jobs when you are running the same 315608-145 finish throughout a project.

Using This 315608-145 Edgebanding In Cabinet Work

Where This ABS Edgebanding Fits Best

This Rehau, Inc. ABS edge banding in the 315608-145 finish serves as edge treatment on panels in cabinet and general woodworking applications, tying into the CP20985 décor program where that surface is used. The 15/16 inch width gives you latitude on panel placement, so you can run it on standard thickness case sides, shelves, or doors and still have enough overhang to trim both faces accurately. At 1.2mm thick, it suits areas where a more substantial edge is preferred, such as exposed cabinet ends or higher-touch surfaces, because the thicker edge presents a more defined profile than thin tape. The embossed and lacquered surface works well where the panel face has texture or a structured appearance, letting the edge keep a similar visual depth rather than a flat look against patterned boards.

Why These Dimensions Support Repeatable Results

The 15/16 x 1.2mm sizing on this ABS edgebanding is designed so your edgebander or hand tools have predictable material to work with across the full 600 foot length, which supports consistent trimming and scraping results from start to finish. The 1.2mm thickness presents a reliable amount of material to your cutters, which helps reduce edge blowout on typical trimming heads and supports a smooth, repeatable setup once your knives are dialed in. The CP20985 décor match and 315608-145 part number keep finish selection straightforward, so once you dial in your process for this finish you can repeat it across doors, drawer fronts, and casework without chasing visual differences. The embossed, lacquered finish arrives with its surface profile already established, which lets you focus your workflow on bonding and trimming steps rather than on separate finishing passes on the edge itself.

Practical Questions About This ABS Edge Banding

Select This Edgebanding For Matching ABS Edges

This Rehau ABS edgebanding, 315608-145, ties ABS material, 15/16 x 1.2mm sizing, and CP20985 embossed lacquered finish into one roll, so cabinet and woodworking shops can run matching ABS edges over 600 feet of production. When your project calls for this specific CP20985 decor and you want a substantial 1.2mm ABS edge along standard panel thicknesses, this edge banding provides the dimensions and finish needed to keep edges aligned with the rest of the job.