Rehau ABS edgebanding 315608-150 is ABS edge banding that covers and protects exposed panel edges, so cabinet and furniture projects present a finished, work-ready surface. The 15/16 inch width gives generous coverage over typical panel thicknesses, which helps installers achieve a consistent reveal with standard trimming tools. The 1.2mm thickness provides a substantial edge profile, so machined corners feel solid and resist everyday contact in busy environments. The ABS material creates a uniform, machinable edge, which supports clean cutting, trimming, and scraping during workflow. The LE CP60506 EMB LAC designation ties this edgebanding to a specific laminate look, so matching edge color and texture to corresponding surfaces stays straightforward on repeat jobs. Supplied in a 600FT length, this continuous coil supports longer production runs or multiple installations, which reduces coil changes and keeps edge-banding operations moving efficiently.
The 15/16 inch width on this Rehau ABS edge banding gives margin beyond typical panel thickness, which helps edgebanders and trimmers remove slight overhang for crisp, flush edges. The 1.2mm thickness offers a balanced profile that responds predictably to cutting and scraping, which is useful when dialing in knives and trimming settings across production runs. The ABS construction provides a stable, consistent strip, so feed and tracking through edgebanding equipment stay predictable from start to finish. Tying these dimensions to the 600FT length means installers can set up once and run a series of doors, drawer fronts, or casework components with consistent edge geometry.
This Rehau ABS edgebanding, identified as 315608-150 and classified as edge banding, is suited to covering exposed edges on cabinets, furniture, and other laminated panels where a coordinated ABS edge is required. The LE CP60506 EMB LAC description links the banding to a specific decorative reference, so it aligns visually with matching CP60506-type laminate designs in coordinated installations. With a width of 15/16 inch, the banding comfortably covers standard panel cores used in many woodworking applications, which supports its use across casework sides, shelves, and fronts. The 1.2mm thickness establishes a defined edge line that complements laminate faces, giving projects a professional appearance when viewed along doors and carcass edges. As part of Wurth Baer Supply's edgebanding category, this product fits into workflows that rely on thermoplastic edging for contemporary laminate-based construction.
The combination of 15/16 inch width and 1.2mm thickness in this ABS edgebanding supports repeatable settings on edgebanding machines, which helps reduce adjustment time between similar jobs. The ABS material creates a homogeneous strip that responds consistently to trimming tools, so edge quality from piece to piece remains stable. The LE CP60506 EMB LAC designation provides a clear visual reference, allowing shops to pair this banding with matching surfaces and maintain color and texture alignment throughout a project. The 600FT coil length enables longer uninterrupted runs, which is important when edging multiple components that must present the same edge appearance across an installation. Using the defined manufacturer part number 315608-150 simplifies reordering, so future phases of work can rely on the same edging characteristics without changing setup or appearance.
Rehau ABS edgebanding 315608-150 is specified at 15/16 inch width and 1.2mm thickness, which supports full edge coverage and provides enough material for precise trimming operations.
The 315608-150 edge banding is made from ABS, giving a uniform thermoplastic edge that machines and trims consistently alongside laminated panel constructions.
The ABS edgebanding roll for part 315608-150 is 600FT long, supporting extended edging runs on multiple components or projects without frequent coil changes.
The LE CP60506 EMB LAC description associates the edgeband with a specific decorative reference, helping align edge appearance with CP60506-style laminate surfaces.
The 1.2mm thickness provides a substantial edge layer, allowing controlled trimming while delivering a solid, defined edge profile on cabinet and furniture components.
The 15/16 inch width offers slight overhang beyond typical panel cores, which allows flush trimming to create clean, aligned edges along laminate faces.
The Rehau ABS edgebanding 315608-150 combines 15/16 inch width, 1.2mm thickness, and ABS material to deliver a defined, machinable edge for laminated panels. The LE CP60506 EMB LAC designation supports visual coordination with CP60506-style surfaces, while the 600FT roll length aligns with production-oriented workflows. For cabinet, furniture, or casework projects that rely on ABS edge banding for a consistent look along exposed cores, this Rehau option from Wurth Baer Supply provides a clearly specified edging choice ready to integrate into established edgebanding processes.
Sold In: 1 Roll