Rehau ABS edgebanding 315608-164 is an ABS edge banding from Rehau, Inc. that finishes and protects exposed board edges in cabinet and woodworking projects. The ABS material provides a consistent, workable plastic edge that pairs with engineered panels in typical shop conditions. The 15/16 inch width covers standard panel thicknesses with a bit of overhang for trimming, which helps produce a flush, professional-looking edge after machining. The 1.2mm thickness adds a solid feel at the edge compared with very thin tapes, supporting a more substantial profile where panels are frequently handled. The LE CP41287 reference in the description identifies the matching laminate or surface design family, so this edgebanding is intended to visually coordinate with that specific surface. The 600 foot length supports longer runs or multiple cabinet jobs without frequent roll changes.
The stated 15/16 inch by 1.2mm size defines how this Rehau ABS edgebanding, part number 315608-164, fits into an installation workflow. The 15/16 inch width offers enough coverage on common 3/4 inch panels to allow slight overhang, which then trims back for a clean, square edge. The 1.2mm thickness produces a noticeable yet manageable edge profile that responds well to standard trimmers and flush routers. The 600 foot length supports feeding through manual or automatic edge-banding setups over many cabinet components before a roll change, which helps keep production moving steadily in a shop environment.
Rehau ABS edgebanding, 315608-164, is an edge banding product in the edgebanding category, intended for covering and protecting exposed panel edges. The ABS material creates a stable plastic edge surface that suits cabinets, casework, and other panel-based assemblies in woodworking. The LE CP41287 notation indicates that this banding aligns with that specific surface pattern or color family, so it serves where a coordinated look between laminate surfaces and edges is needed. The 15/16 inch width works with typical panel dimensions used in cabinetry, allowing fabricators to band verticals, shelves, and doors using the same size strip. With 600 feet available, shops can run series of parts, such as kitchen runs or commercial fixtures, while maintaining consistent edging across all components.
The defined 1.2mm thickness of this Rehau ABS edge banding affects how the finished edge behaves during trimming and in daily use. That thickness yields an edge that is substantial enough to resist visual telegraphing of minor substrate variations, supporting a more uniform appearance along long cabinet runs. The ABS construction works with typical edge trimming tools, which helps maintain repeatable results as parts move from banding through finishing. The LE CP41287 reference guides selection when a project calls for that particular decorative surface, helping installers and fabricators keep color and texture alignment from panel face to edge. The extended 600 foot length limits roll changes during production, which reduces interruptions and helps keep edge alignment and orientation consistent across multiple batches of parts.
Rehau 315608-164 is an ABS edgebanding, classified as edge banding, used to cover and protect exposed edges on panel-based components in cabinet and woodworking projects.
The edgebanding has a stated size of 15/16 inch by 1.2mm, which defines its coverage on common panel thicknesses and the resulting edge profile after trimming.
The 1.2mm thickness creates a solid plastic edge profile that supports clean trimming and helps maintain a consistent visual line along doors, shelves, and cabinet sides.
LE CP41287 in the description identifies the decorative surface design family this banding aligns with, supporting visual coordination between the edge and matching panels.
The 600 foot length lets fabricators run many cabinet or fixture components from a single roll, which supports longer production runs with consistent edging.
This ABS edge banding is manufactured by Rehau, Inc., and is offered through Wurth Baer Supply for use in woodworking and cabinet projects.
Rehau ABS edgebanding 315608-164 combines a 15/16 inch width, 1.2mm thickness, and LE CP41287 design reference to support coordinated cabinet and panel work. The 600 foot length suits production-oriented shops that value consistent edging across multiple parts. For projects built around the matching LE CP41287 surface design, this ABS edge banding from Rehau, Inc. provides a defined size and material choice to finish exposed edges in a controlled, repeatable way on cabinet, fixture, or casework runs.
Sold In: 1 Roll