Rehau ABS edgebanding 315608-171 15/16 x 1.2mm

Rehau ABS Edgebanding 315608-171 For Clean Edges

Rehau ABS edgebanding 315608-171 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so they match and protect the board in cabinet and furniture work. The 15/16 inch width stated as 15/16X1.2MM ABS in the SAP description gives coverage over common 3/4 inch panels with extra width for trimming, which supports tight-looking edges after machining. The 1.2mm thickness described in the SAP detail provides a more substantial edge than thin tape, which helps the edge stand up better to normal shop handling and repeated contact. The ABS material called out in the description identifies this as a thermoplastic banding rather than veneer, which supports consistent color and profile when processed with standard edgebanding equipment. The manufacturer part number 315608-171 ties this specific color and specification back to Rehau, which helps match existing runs or coordinate with other Rehau-based projects.

Key Rehau ABS Edge Banding Working Advantages

• The SAP description identifying 15/16X1.2MM ABS sets the banding width and thickness, so installers can set trimmers, routers, and edgebanders accurately for minimal cleanup and fewer edge reworks on cabinet and casework runs.
• The ABS material called out in the product data defines it as a plastic edgebanding, so fabricators can plan heat, feed, and trimming setups around predictable machining behavior compared with wood veneer during standard shop workflows.
• The Rehau, Inc. brand identified in the product data links this edgebanding to a known manufacturer, which helps shops align it with existing Rehau color programs and technical parameters already used on their equipment.
• The manufacturer part number 315608-171 provides a precise reference for reorders, which supports consistent edge appearance from job to job when the same banding specification is required on repeat projects.
• The product classification as Edge Banding under the edgebanding category confirms its role in closing exposed substrate edges, so designers can confidently call it out in project documents where ABS edges are required.

Edgebanding Dimensions That Support Straightforward Setup

The 15/16 inch width defined in the SAP description as 15/16X1.2MM ABS gives a clear sizing target for edgebanding machines, which simplifies fence, pressure roller, and trimming settings when running standard panel thicknesses. The 1.2mm thickness noted in the same description provides enough material for sensible radius scraping or light profile work, which helps achieve smooth transitions between the face and the edge without cutting through the band. The ABS designation in the data signals a thermoplastic that responds consistently to heat and pressure, which supports predictable bonding when used with equipment and adhesives designed for ABS banding.

How This ABS Edge Banding Fits Real Projects

Where This Rehau ABS Edgebanding 315608-171 Works

The product class listed as Edge Banding positions Rehau ABS edgebanding 315608-171 for use wherever exposed board edges need to be finished, which suits cabinet boxes, shelving, and similar panel constructions. The 15/16X1.2MM ABS sizing from the SAP description aligns with edge coverage on many engineered panels, which supports use on case sides, tops, and bottoms that are cut from standard thickness sheet goods. The ABS material identified in the product data supports use in applications where a plastic edge is preferred over wood, which can match other ABS-trimmed components used in the same installation. The association with the edgebanding category confirms it as a finishing edge solution, which keeps it aligned with workflow steps after panels are cut and machined.

Why The 15/16X1.2MM ABS Format Matters

The 15/16X1.2MM ABS dimension in the SAP description gives fabricators a defined edge banding size, which helps them program automatic edgebanders or set manual trimmers so the banding overhang and final edge reveal are controlled. The 1.2mm thickness captured in that same detail provides more edge mass than ultra-thin bandings, which supports a more solid-feeling edge that can better tolerate scraping and light sanding during finishing steps. The ABS identifier shows that the banding is a plastic edge band, which matters for adhesive choice and temperature settings on edgebanders that are already dialed in for ABS products. The use of the specific manufacturer part number 315608-171 ties this banding to a defined Rehau item, which supports accurate matching when projects call out this exact number in drawings or cut lists.

Common Questions About Rehau 315608-171 ABS Edgebanding

Choose This Rehau ABS Edgebanding For Defined Sizing

Rehau ABS edgebanding 315608-171 combines a clearly stated 15/16X1.2MM ABS dimension with a specific Rehau manufacturer part number, giving shops a defined edge solution they can call out in drawings, load into programs, and repeat confidently on follow-up work.