Rehau ABS edgebanding 315608-177 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and furniture projects have a defined transition instead of raw substrates. The SAP description lists dimensions of 15/16 x 1.2mm, so this banding covers typical 3/4-inch panel edges while allowing a slight overhang for trimming during fabrication. The same description identifies the material as ABS, which provides a consistent, machinable surface for edge processing. The notation ABS LE CP21025 EMB LAC describes a specific decorative and surface configuration, giving fabricators a repeatable visual match wherever this code is specified on drawings. The 600FT length in the description indicates a long continuous run, supporting production jobs where extended footage reduces changeovers and keeps setups stable.
The SAP description giving a 15/16 x 1.2mm ABS profile means machines can be set with clear expectations for width and thickness, which supports repeatable setup on edgebanding equipment. The 15/16-inch width ensures the banding extends past both faces of typical 3/4-inch panels, so trimming operations can bring the edge back flush without exposing the core. The 1.2mm thickness provides a defined profile for trimming knives and flush trimmers, allowing consistent pressure and feed without chasing a thin film edge. Because the material is specified as ABS, shops using ABS settings on their equipment can align feed speeds and temperature profiles with this product code for uniform processing along the full 600FT length.
The product is classified in the Business Data as part of a woodworking-focused range, and within that, the Category in Product Data is Edgebanding, so this ABS edgebanding fits naturally into cabinet and furniture panel construction where edge finishing is required. The SAP description shows the width as 15/16 inch, positioning this banding for use on panels around 3/4 inch thick where slight overhang is beneficial for trimming operations. The 1.2mm thickness noted in the same description produces a visible edge profile, which suits applications where a defined edge line is specified rather than a very thin tape profile. The ABS LE CP21025 EMB LAC notation ties the banding to a particular decorative and surface scheme, so when drawings or cut lists reference this code, fabricators can apply the same product across all matching components for visual consistency.
The manufacturer part number 315608-177 gives installers and shops a direct reference when matching existing work or fulfilling a specification, which reduces rework when repeating jobs over time. The SAP description explicitly states ABS LE CP21025 EMB LAC, so that full code defines a stable visual and surface reference that can be repeated whenever the same part number is ordered for replacement or expansion work. With a 600FT length identified in the SAP description, a single roll supports multiple panels or full projects under one code, which simplifies material tracking on the shop floor. The classification as Edge Banding confirms the product role at the interface between panel face and edge, so using this item wherever that role is called out helps keep edge appearance and feel consistent across a run. The connection to Rehau, Inc. as the brand in Product Data gives a clear source identity, which supports standardizing on this part number for future matching or service work.
Rehau ABS edgebanding 315608-177 is described as 15/16 x 1.2mm, so it covers typical 3/4-inch panel edges with extra width for trimming to a clean, flush finished edge.
The SAP description specifies ABS, so this edgeband uses an ABS thermoplastic composition that works with ABS-capable edging equipment in woodworking environments.
The listed 1.2mm thickness creates a defined edge profile, giving trimming tools enough material to machine while maintaining a substantial, uniform edge line on panels.
The 15/16-inch width exceeds the face of most 3/4-inch panels, allowing controlled overhang that can be trimmed back to a precise, flush cabinet or furniture edge.
ABS LE CP21025 EMB LAC in the SAP description identifies a specific decorative and surface configuration, supporting consistent appearance wherever this exact code is specified.
The 600FT length listed in the SAP description provides extended footage, allowing longer edging runs with fewer coil changes and steady setup conditions on production equipment.
Rehau ABS edgebanding 315608-177 combines a 15/16 x 1.2mm profile with the ABS LE CP21025 EMB LAC specification, so installers can match drawings that call out this exact edge treatment. The 600FT length supports production-oriented workflows where continuous edging is important. Sourcing this specific manufacturer part number 315608-177 from Wurth Baer Supply aligns panel edge work with a clearly defined product code for repeat projects and coordinated cabinet or furniture runs.
Sold In: 1 Roll