Rehau ABS edgebanding 315608-179 is an ABS edge banding designed for finishing exposed edges, so cabinet and panel projects get a defined, uniform edge rather than a raw substrate line. The ABS material identified in the description supports a solid, machinable edge that works with common woodworking processes, helping installers trim and finish without changing standard shop routines. The 15/16 inch width stated in the SAP description gives coverage across typical 3/4 inch panels with extra margin, allowing a bit of overhang for flush trimming and helping hide slight panel variation. The 1.2 mm thickness provided in the data creates a more substantial edge profile than thin tape, which supports cleaner milling at corners and ends. The LE CP21027 EMB LAC designation identifies the specific design and surface configuration, so matching to existing runs that use the same code stays consistent across jobs.
The 15/16 inch width defined in the SAP description gives installers enough overhang beyond common 3/4 inch panels, so trimming operations can remove minor misalignment while still fully covering the substrate. The 1.2 mm thickness listed in the product data provides a robust edge layer, which helps the profile hold its line when cut, mitered, or profiled on cabinet parts. The ABS material called out in the product name and category supports machining with common shop tools, allowing the banding to be processed with familiar trim routers, knives, or edge trimmers. The 600 FT length referenced in the description allows long, uninterrupted runs on repetitive cabinet or panel work, which helps maintain appearance uniformity from part to part.
This Rehau ABS edgebanding, identified as product class Edge Banding and category Edgebanding, is oriented to edge treatment on panels and components in woodworking environments. The 15/16 inch width from the SAP description lets the banding cover typical case and door components cut from 3/4 inch material, so visible edges receive a uniform facing instead of exposing core material. The 1.2 mm thickness specified for this ABS edgebanding supports use on cabinet sides, shelves, or similar parts where a more defined edge is preferred, giving the finished piece a noticeable edge line rather than a thin tape look. The LE CP21027 EMB LAC code within the description identifies the design and surface style for this banding, so projects built around that code can maintain the same appearance when additional parts are produced. The ABS material indicated in the product name works within woodworking shops that process synthetic edgebanding, aligning with typical panel construction methods using laminate or similar surfacing.
The 15/16 inch width documented in the SAP description provides extra edge coverage around 3/4 inch panels, which gives room to shift parts slightly during application without exposing the core once the edge is trimmed. The 1.2 mm thickness listed for this Rehau ABS edgebanding supplies a stable edge mass, which supports accurate trimming passes and helps maintain a straight visual line along cabinet fronts or shelves. The 600 FT length set out in the description allows long runs from a single source, which helps keep color and surface character consistent across an entire project using the same LE CP21027 EMB LAC design. The ABS composition referenced in the product data supports repeatable cutting and finishing, so once a shop dials in settings for this material, the same approach can be carried across multiple jobs using this part number 315608-179.
Rehau ABS edgebanding 315608-179 uses a 15/16 inch width, giving coverage that suits many 3/4 inch panel edges while leaving a small overhang for trimming to a flush finish.
This ABS edge banding has a 1.2 mm thickness, providing a more substantial edge profile that supports cleaner trimming and a more defined visual line on cabinets and panels.
The Edge Banding product class and Edgebanding category align this ABS material with cabinet, casework, and panel projects where exposed edges require a finished appearance.
The 600 FT length noted in the SAP description supports extended production runs, helping maintain a consistent look across multiple cabinets or panels using the same design.
The LE CP21027 EMB LAC code in the description identifies the specific design and surface style, helping keep edge appearance aligned with parts built around that same code.
The ABS material named in the product data provides a solid, uniform edging that works with common trimming and routing tools, supporting consistent processing in woodworking shops.
This Rehau ABS edgebanding, defined by part number 315608-179 with a 15/16 inch width, 1.2 mm thickness, and 600 FT length, offers a clearly specified edge treatment option for woodworking projects. The LE CP21027 EMB LAC designation ties appearance to a specific design, helping projects maintain continuity when new components are produced later. For work that calls for ABS edge banding within the Edge Banding product class, this configuration provides a defined set of dimensions and style codes to align with ongoing cabinet and panel production.
Sold In: 1 Roll