Rehau ABS edgebanding 315608-187 is an ABS edge banding designed to finish exposed substrate edges on cabinets, furniture, and casework. The 15/16 inch width covers typical panel thickness while giving a small margin for trimming, which helps produce clean, flush edges after processing. The 1.2mm thickness provides a substantial edge profile, which supports a solid feel at doors and drawer fronts. The ABS material is engineered as an edge banding substrate, so it accepts machining on common edgebanders without the brittle behavior of some harder plastics. The LE CP10078 reference and ABS edge banding construction identify this as a project-specific match for jobs calling for that combination, which helps maintain visual consistency across cabinets. Supplied as a 600 foot length, the roll format supports longer runs and repeated setups on production edgebanders.
This ABS edgebanding 15/16 x 1.2mm format is sized for typical cabinet and furniture panels, so it covers common substrate thicknesses while leaving material for trimming. The 1.2mm thickness gives edgebanders a stable profile to grab, which supports smoother feeding through glue, pressure, and trimming stations. The ABS edge banding construction is intended for standard woodworking production environments, so it suits casework, cabinet, and fixture edge finishing where a thermoplastic band is specified. The LE CP10078, EMB, and LAC descriptors help installers and shops tie this roll to matching sheet goods or prior project specs, which is important when replacements or additions must visually match existing work.
This Rehau ABS edgebanding, identified as 315608-187 and classified as edge banding, is suited to finishing cabinet, furniture, and general casework edges where ABS is specified as the banding material. The 15/16 inch width is geared toward covering standard panel thicknesses used in cabinetry and fixtures, so it supports shop-built components that rely on a small overhang for post-processing trim cuts. With a 1.2mm thickness, this banding fits projects that call for a thicker edge than thin-tape solutions, giving fronts and shelves a more substantial look. The LE CP10078 designation ties this roll to a specific decor reference, which matters on multi-room or phased projects where additional pieces need to track an existing finish selection in the shop schedule.
The ABS edge banding material is formulated for use as edgebanding, so it is suited to machining on production edgebanders that trim and scrape to final dimension, helping reduce rework from chipping. The 1.2mm thickness offers enough material for trimming and buffing operations without thinning the edge excessively, which supports a more uniform reveal across cabinet runs. The 15/16 inch width pairs with common substrate sizes, so operators can set up edgebanders to run this roll across multiple cabinet components with the same trim settings. The embossed lacquer reference, EMB LAC, indicates a lacquer-treated, textured surface that is designed to present a finished edge, so finished parts align visually with matching boards or laminates designated under LE CP10078 in project documentation.
Rehau ABS edgebanding 315608-187 is specified at 15/16 inch width and 1.2mm thickness, which suits standard panel edges and provides enough material for trimming operations on typical cabinet components.
The 315608-187 edge banding is ABS edge banding, so it is a thermoplastic band designed for automated edgebanding equipment and common woodworking environments using ABS-based edges.
The ABS edgebanding 315608-187 is specified at 600 feet, providing enough length for multi-piece cabinet, furniture, or casework runs in a production or shop setting.
On this edgebanding, LE CP10078 identifies a specific Rehau reference, which helps match the banding appearance to associated boards or laminates specified under the same code.
This ABS edge banding is marked EMB LAC, indicating an embossed lacquer surface, which provides a textured, lacquer-treated finish suited to finished cabinet or furniture edges.
ABS edgebanding 15/16 x 1.2mm suits cabinet, furniture, and casework projects needing an ABS edge with a substantial 1.2mm profile and width matched to common panel thicknesses.
Choose Rehau ABS edgebanding 315608-187 when a 15/16 inch by 1.2mm ABS edge is specified with the LE CP10078 embossed lacquer finish. The 600 foot roll length suits shop or production environments that repeat this decor across cabinet, furniture, or casework runs. Ordering this specific manufacturer part number, 315608-187, aligns the edge banding with projects or drawings that call out that exact reference, helping support consistent visual results from one batch of components to the next.
Sold In: 1 Roll