Rehau ABS edgebanding 315608-195 is an ABS edge banding designed to finish exposed edges, so cabinet and furniture projects get a defined transition between panel faces and edges. The SAP description states 15/16 x 1.2mm dimensions, which gives a narrow, controlled edge strip that suits common board thicknesses in woodworking. The ABS material description identifies it as a plastic edgebanding, which creates a uniform edge surface where raw substrate would otherwise show. The CP41155 reference in the description identifies a specific look within the LE CP41155 EMB LAC designation, helping shops match projects that already use this code. The 600FT length noted in the description provides a long, continuous run for larger jobs, so shops can handle multiple parts without changing rolls as often. All of this gives installers an identified, repeatable edgebanding option.
The SAP description notes a 15/16 inch width, giving installers an edge strip that overhangs common panel thicknesses for trimming, which supports clean routing or scraping during installation. The 1.2mm thickness detail defines how much edge material will sit proud of the substrate before flush trimming, which matters when planning tooling and passes. The ABS material designation indicates a plastic-based edgebanding, so shops can align it with edgebanding equipment set up for ABS. The 600FT length referenced in the description indicates a long roll, allowing planning of part counts and cutting sequences from a single product code on repetitive cabinet or furniture runs.
The product name identifies this as Rehau ABS Edgebanding, 315608-195, which positions it for use on cabinet, furniture, and fixture edges where ABS edge banding is specified. The category listing as Edgebanding places it within edge finishing products, so its role is to cover exposed edges of panels in woodworking applications. The SAP description confirms a 15/16 x 1.2mm ABS strip, so it aligns with panel work that uses similar dimensions and expects a narrow band to be applied along the edge. The LE CP41155 EMB LAC reference gives a detailed identifier that supports use in projects that specify this exact look and code, maintaining consistency from drawing or work order to installed parts.
The stated 15/16 inch width gives enough material beyond the panel surface for trimming, which helps create a straight, flush edge line after machining. The 1.2mm thickness forms a measurable edge cap, allowing shops to dial in trimming tools so the ABS band blends with panel faces. The ABS material description signals a thermoplastic product, enabling consistent behavior under processes designed for ABS edge banding in woodworking environments. The 600FT length listed in the SAP description supports running many parts from the same roll, which helps maintain visual continuity across cabinet doors, drawer fronts, and panels ordered under the same job number. The explicit manufacturer part number 315608-195 also helps repeat orders stay tied to the same specification, supporting long-term consistency.
Rehau ABS Edgebanding 315608-195 is identified in the SAP description as 15/16 x 1.2mm, so it provides a narrow band suited to covering typical panel edges before trimming.
The product is described as ABS edgebanding, meaning it is an ABS plastic edge banding that covers raw panel edges with a uniform surface for finishing work.
The SAP description lists 600FT, providing a long roll that supports multiple cabinet or furniture parts under the same project without frequent roll changes.
LE CP41155 EMB LAC appears in the SAP description as part of the identification, giving a specific code that supports matching to designs or jobs referencing this exact designation.
The 1.2mm thickness specified in the description provides a defined edge layer that can be routed or trimmed flush, supporting a consistent finished profile along panel edges.
The manufacturer part number 315608-195 uniquely identifies this Rehau ABS edgebanding, so repeat jobs can rely on the same dimensions and code referenced in project documentation.
The product name and SAP description identify Rehau ABS Edgebanding 315608-195 as a 15/16 x 1.2mm ABS edge banding in a 600FT length, giving shops a clearly defined option for covering panel edges. The LE CP41155 EMB LAC designation links this product to work orders that call out that exact identifier, connecting design notes to a specific roll. The edge-focused dimensions, ABS material description, and long-run length all support cabinet and furniture production where a consistent, coded edgebanding is required. For projects built around this part number, selecting this edgebanding aligns field work with the documented specification.
Sold In: 1 Roll