Rehau ABS edgebanding 315608-235 is an ABS edge banding product from Rehau, Inc. that provides a finished edge for panels, so cabinet and fixture projects present a consistent appearance at every exposed edge. The SAP description shows a 15/16 inch width and 1.2 mm thickness, giving coverage sized for common panel builds where a near full-inch band helps hide core material. The ABS material forms a defined edge profile during processing, which supports tight visual lines on doors, drawer fronts, and casework ends. LE CP21056 EMB LAC appears in the description as part of the finish and design code, tying this specific band to coordinated surfaces in a project line. The 600 FT reference indicates a long run length suitable for production or multi-job use where consistent edging is needed across many parts.
The 15/16 inch width of this Rehau ABS edgebanding, 315608-235, works as an oversize band for common panel thicknesses, so installers can bond the band and then trim both faces back to the board. That extra width gives room to correct minor alignment variation during application while still ending with flush edges. The 1.2 mm thickness offers enough material for trimming tools to engage cleanly, which helps reduce chatter at the cutter and supports a smoother edge when routing or scraping. The ABS construction is suited to standard edgebanding equipment processes, so shops can run it through edgebanders or apply it with appropriate bonding setups and then edge-finish it using typical woodworking workflows.
This Rehau ABS edgebanding, identified as 315608-235 and classified as edge banding, serves as the edge treatment for cabinet parts, furniture components, and other laminated panels where exposed core edges must be covered. The product falls within the Edgebanding product class, so it is intended to be applied along the edge of panels before trimming and finishing. With its 15/16 inch width, it can be run on edges of typical casework sides, shelves, and doors that are built from panel stock, and the oversize dimension supports later flush trimming on both faces. The 1.2 mm thickness allows the edge to read as a defined band after machining, which is suited to applications where a visible, consistent edge profile is part of the design intent.
The 15/16 x 1.2 mm sizing of Rehau ABS edgebanding 315608-235 supports repeatable setup on edgebanders, because operators can dial in trim and scrape settings around a known thickness and oversize width. ABS material provides an edge band that behaves uniformly under cutting tools, which contributes to clean joints where the band meets the panel surface. The LE CP21056 EMB LAC detail in the SAP description helps specifiers call out the exact decorative option, so projects using this banding can maintain the same look from part to part. The 600 FT length reference supports longer production runs, which helps shops maintain consistent edging appearance across multiple cabinets or fixtures within a job without changing to a different batch or code. As a Rehau, Inc. product supplied by Wurth Baer Supply, it fits into professional woodworking workflows that rely on known part numbers for reorders and project documentation.
Rehau ABS edgebanding 315608-235 is described as 15/16 x 1.2 mm, giving an oversize width and defined thickness that support flush trimming and a substantial edge profile on panel components.
Rehau 315608-235 is specified as ABS edge banding, so it is made from ABS material that responds well to standard edgebanding processing and edge-trimming operations in woodworking shops.
The 1.2 mm thickness on this ABS edgebanding provides enough material for routing and scraping, resulting in a more pronounced, solid-feeling edge on cabinet doors, drawers, and casework parts.
The 15/16 inch width gives slight oversize coverage across common panel thicknesses, allowing installers to bond the banding and trim both faces back to a clean, flush edge without exposing the core.
LE CP21056 EMB LAC appears in the SAP description as a finish and design reference, helping specifiers match this ABS edgebanding to coordinated surfaces and finishes in a project lineup.
The SAP description notes 600 FT for this ABS edgebanding, providing a long length suited to production runs and multi-cabinet projects that require consistent edging from the same part number.
Rehau ABS edgebanding 315608-235 from Wurth Baer Supply combines 15/16 inch width, 1.2 mm thickness, and ABS construction to support clean, consistent panel edges. The LE CP21056 EMB LAC designation and 600 FT length give fabricators a defined, repeatable option for edging work.
Sold In: 1 Roll