Rehau ABS edgebanding 315608-240 is an ABS edge banding that finishes exposed panel edges, so cabinet and furniture projects present a uniform, professional edge. The 15/16 inch width covers standard panel thickness with overhang for trimming, helping installers achieve tight, straight lines along cabinet sides, shelves, and doors. The 1.2mm thickness gives the edge band a substantial profile, which supports consistent routing or trimming without chatter. The CP41352 embossed lacquer surface provides a textured, lacquered finish, so the edge visually matches CP41352-style surfaces across a run of parts. This ABS construction creates a solid plastic edge, which helps protect substrate edges from minor knocks during normal use. The 600 ft length supplies a continuous run for production or larger jobs, reducing splice points along cabinet runs and keeping workflow moving at the edgebander or during manual application.
This Rehau ABS edge banding uses a 15/16 inch width to give installers coverage past the face of common panel thicknesses, which simplifies alignment at the edgebander or during hand application. Extra width allows the band to be centered quickly, then trimmed back to a flush edge in a single pass. The 1.2mm thickness offers enough body to track smoothly through trimming tools, which can support consistent profiling on cabinet fronts and exposed shelf edges. Together, this width and thickness combination helps shops repeat the same edge appearance across doors, drawer fronts, and carcass parts without changing setup.
The Rehau ABS edgebanding, manufacturer part 315608-240, serves as edge finishing for cabinetry, casework, and panel-based furniture where ABS edge banding is specified. The 15/16 inch width is sized to cover panels used in these assemblies with room to trim, supporting straight, even edges at cabinet sides, partitions, and shelves. Its 1.2mm thickness gives the edge a noticeable profile, which suits doors and drawer fronts that need a defined edge line rather than an ultra-thin strip. The CP41352 embossed lacquer designation ties this edgeband to CP41352-style surfaces, helping fabricators coordinate edges and faces on the same job. In practice, this lets shops run a series of parts using the same color and texture reference, so cabinets, panels, and finished edges align visually.
The ABS edge banding Rehau 315608-240 combines its ABS material, 15/16 inch width, and 1.2mm thickness to support repeatable edging results from one panel to the next. The ABS material maintains a uniform profile along the 600 ft length, which helps edgebanding equipment hold steady pressure and speed without frequent adjustments. The 15/16 inch width gives operators tolerance when feeding parts, so slight panel variation still finishes with a flush edge after trimming. At 1.2mm, the band has enough depth for trimming knives or routers to cut cleanly while keeping a consistent reveal, which matters when lining up door and drawer gaps. The CP41352 embossed lacquer finish further supports consistency by tying the edge appearance to a specific finish reference, so multiple production batches can target the same surface look on cabinetry and panel work.
Rehau ABS edgebanding 315608-240 is 15/16 inch wide and 1.2mm thick, giving coverage past typical panel edges while providing enough material for clean trimming and profiling.
The CP41352 embossed lacquer finish gives the ABS edgebanding a textured, lacquered surface, helping edges visually align with CP41352-style panel finishes in cabinet and furniture runs.
The 15/16 x 1.2mm ABS edgebanding works on cabinet sides, shelving, doors, and panel-based furniture, providing a finished plastic edge around exposed board edges.
The 600 ft length allows long cabinet runs and multiple panels to be edged from one coil, supporting continuous production with fewer coil changes.
The 1.2mm thickness provides a solid edge profile, which helps trimming tools cut smoothly and supports a consistent visual line on doors and fronts.
The ABS material forms a continuous plastic edge, protecting panel cores at exposed edges and supporting a uniform appearance across cabinetry components.
Rehau ABS edgebanding 315608-240 combines a 15/16 inch width, 1.2mm thickness, CP41352 embossed lacquer finish, and 600 ft length to support efficient cabinet and panel production. Add this ABS edge banding to your next run when you need consistent CP41352-style edges across casework, doors, and shelving.
Sold In: 1 Roll