Rehau ABS edgebanding 315608-269 is an ABS edge banding designed to finish and protect panel edges in cabinet and woodworking projects. The 15/16 inch width covers standard panel thickness with a small tolerance, so exposed substrate along casework and shelving edges is concealed in one pass. The 1.2mm thickness gives a solid edge profile that sands and trims predictably, which supports consistent seams along long runs. The embossed lacquered surface provides a textured, finished appearance in a single operation, so there is no separate topcoat step on the edge after application. The LE CP60537 EMB LAC designation identifies the specific embossed lacquer finish and pattern, which matters when matching existing components that use the same code. Supplied in a 600 ft length, this ABS edgebanding supports larger production runs and repeat jobs using the same finish code without switching materials mid-project.
This Rehau ABS edgebanding uses a 15/16 inch width, so it covers standard panel thickness with a slight margin for trimming, which helps maintain straight, clean lines along cabinet sides and tops. The 1.2mm thickness works as a balance between a solid feel and manageable trimming, which is useful on doors, drawer fronts, and carcass parts where a defined edge is desirable. Because the material is ABS, the edge can be trimmed, routed, or scraped using standard ABS-capable edgebanding processes, which supports efficient workflow on typical shop equipment. The specific LE CP60537 EMB LAC designation identifies the embossed lacquered finish, which matters when the visual match of edges to adjacent surfaces is important on production or replacement jobs.
This Rehau, Inc. ABS edgebanding, product class Edge Banding, is suited to finishing exposed edges on casework, cabinet boxes, and similar panel-based assemblies where an ABS edge is desired. The 15/16 inch width allows coverage of typical panel faces with some overhang, which is helpful on vertical cabinet sides, horizontal shelves, and tops where trimmed edges must appear uniform. At 1.2mm thickness, the material supports creating a defined edge on doors and drawer fronts without feeling overly bulky, which is useful when aligning fronts across banks of cabinets. The embossed lacquered surface, denoted by LE CP60537 EMB LAC, provides a visually finished, textured edge, so panels using this edgebanding present a coordinated appearance along all exposed sides on built-ins, casework runs, and storage units.
The 15/16 inch by 1.2mm dimension of this ABS edgebanding gives installers and shop crews a predictable edge size, which simplifies setup of trimmers and routers across multiple jobs. Because the material is ABS, the edge responds consistently to standard trimming, scraping, and routing processes, which helps keep seams tight and reduces rework from chipped or uneven edges. The LE CP60537 EMB LAC code locks in a specific embossed lacquered finish, which is important when replacement panels or additional cabinets must visually align with earlier work that used the same code. Using the same Rehau ABS edgebanding 315608-269 on follow-up projects helps maintain a continuous look along runs of cabinets or shelving where edges are highly visible. The 600 ft length supports this repeatability by allowing multiple units, rooms, or matching pieces to be edged from the same run of material.
Rehau ABS edgebanding 315608-269 is specified as 15/16 inch wide and 1.2mm thick, so it covers common panel thickness while providing a substantial edge profile for trimming and finishing.
The LE CP60537 EMB LAC designation identifies a specific embossed lacquered finish, so the color and texture can be matched across panels and projects using the same reference code.
The 1.2mm thickness provides a solid edge that can be trimmed, routed, or scraped using typical ABS-capable processes, supporting clean lines on cabinet doors, fronts, and carcass edges.
The 15/16 inch width provides coverage across standard board thickness with some trim allowance, which helps conceal substrate while keeping trimming operations straightforward along long edges.
The 600 ft length supports extended edging runs on multiple cabinets or casework pieces, so the same finish code can be used consistently across larger or repeat projects.
The embossed lacquered surface provides a textured, finished appearance directly on the edge, so panels present a coordinated look without a separate edge finishing step.
This Rehau ABS edgebanding 315608-269 combines a 15/16 inch width, 1.2mm thickness, and an LE CP60537 EMB LAC embossed lacquered finish, so it fits cabinet and panel work where a defined ABS edge and specific finish code are important. The 600 ft length supports edging multiple cabinets, shelves, and panels with the same material, which helps keep finish and dimensions consistent across projects. For shops and installers standardizing on this Rehau, Inc. edge banding, selecting this product allows edges on new, expanded, or replacement casework to align with existing work that uses the same 315608-269 specification.
Sold In: 1 Roll