Rehau ABS edgebanding 315608-273 is an ABS edge banding identified as 15/16 x 1.2mm, giving cabinet and casework edges a defined thickness that matches common panel dimensions. The 15/16 inch width covers the edge of typical board thicknesses, helping installers hide exposed substrate in one pass. The 1.2mm thickness creates a substantial edge profile that resists minor knocks compared with very thin edge material. This edgebanding is manufactured by Rehau, Inc., so its dimensions and material are consistent from roll to roll, which supports repeatable results on multi-cabinet runs. The product is classified as edge banding, so it is intended specifically for covering and finishing raw edges in woodworking and similar applications where panels need a finished perimeter. The SAP description also notes LE CP41166 EMB LAC, giving a precise reference for matching this banding to corresponding decorative surfaces in projects that follow that code.
This ABS edge banding is listed at 15/16 x 1.2mm, so installers know both the coverage width and the material thickness before setting up machines. The 15/16 inch width gives a small margin beyond many common panel thicknesses, which supports flush trimming without exposing core material. The 1.2mm thickness influences trimming and scraping settings, since the cutter engages a consistent material depth along every edge. Because this product is classed as edge banding, fabricators can plan to apply it after cutting and machining panels, integrating it into existing edgebander or manual application processes. The defined size information helps estimators calculate coverage on jobs where a specific linear footage and edge detail are specified.
This Rehau ABS edgebanding, listed as 15/16 x 1.2mm, is suited for covering the exposed edges of panels in cabinet, casework, or similar constructions that match its width and thickness profile. The edge banding classification means it is meant to be applied directly to cut panel edges after sizing operations, turning raw edges into visually finished lines around shelves, sides, and tops. Its ABS material makes it a practical option for shop-built pieces that need consistent edges along long runs, such as banks of cabinets or closet systems. The LE CP41166 EMB LAC reference in the description helps align this edgebanding with panel or surface designs that are specified by the same code, so project planners can connect decorative surface selections to the corresponding edge treatment on drawings or cut lists. For woodworking operations that repeat standard designs, tying work orders to the 315608-273 part number maintains consistency across batches.
The stated 15/16 inch width gives fabricators a clear dimension for tool setup, so edgebanders and trimmers can be configured to leave just enough overhang for clean flush cuts without reworking edges. The 1.2mm thickness specifies how much material stands proud of the panel edge before trimming, which matters when dialing in trimming knives or scraping tools to avoid digging into the panel surface. Because the product is ABS edge banding from Rehau, Inc., shops can expect the same thickness from roll to roll, reducing time spent re-tuning equipment between runs using this exact part. The clear manufacturer part number 315608-273 also lets buyers match documentation, shop drawings, and inventory labels, which reduces mistakes when multiple edge banding sizes are stored together. Using the SAP description 15/16X1.2MM ABS LE CP41166 EMB LAC 600FT as a reference helps purchasing teams connect project specifications directly to this defined dimension and material.
Rehau ABS edgebanding 315608-273 is made from ABS, so it provides a solid synthetic edge that covers exposed panel cores in cabinet and casework construction.
Rehau ABS edgebanding 315608-273 is described as 15/16 x 1.2mm, giving a width suitable for common panel thicknesses and a 1.2mm edge thickness for a defined profile.
Rehau ABS edgebanding 315608-273 is classified as edge banding, so it is applied to raw panel edges after cutting, creating finished edges on cabinets, shelves, and similar components.
The 15/16 inch width on Rehau ABS edgebanding 315608-273 lets installers cover typical panel edges with slight overhang, supporting accurate trimming to a flush, clean edge line.
The 1.2mm thickness on Rehau ABS edgebanding 315608-273 defines how much edge material is trimmed, helping set cutters and scrapers for consistent edge appearance.
The part number 315608-273 uniquely identifies this Rehau ABS edgebanding, allowing shops to reorder the same size and reference it reliably in project documentation.
Rehau ABS edgebanding 315608-273 provides a clearly defined 15/16 x 1.2mm ABS edge for covering exposed panel cores in cabinet and casework projects. Its edge banding classification and precise part identification support streamlined ordering and consistent setup in production environments. The LE CP41166 EMB LAC designation further anchors this product to specific decorative references, which helps align surfaces and edges on planned jobs. For shops standardizing on a known ABS edge profile, this Rehau, Inc. edgebanding offers a repeatable option that matches documented dimensions and codes across multiple builds.
Sold In: 1 Roll