Rehau ABS edgebanding 315608-276 is an ABS edge banding product designed to finish exposed panel edges on woodworking and cabinet projects. The ABS material creates a defined edge profile, which helps panels present a consistent appearance across a run of cabinets or casework. The SAP description lists a 15/16 x 1.2mm size, so the banding is sized to cover common panel thicknesses while giving a slight overhang for trimming and flush finishing. The description also specifies ABS LE CP40966 EMB LAC, identifying a particular decorative and surface combination, which helps projects maintain visual continuity when this part number is used throughout a job. The 600FT reference defines the supplied length, which supports longer production runs or multiple cabinets using the same banding without frequent changeover.
The SAP description lists a 15/16 width, giving enough coverage to span typical panel thicknesses while leaving trim allowance along the edge. The 1.2mm thickness provides a defined band that supports standard edgebanding equipment settings across multiple passes. Being an ABS edge banding product, it is intended for use where ABS-compatible bonding processes are in place, which allows shops to integrate it into existing edgebanding lines. The 600FT length reference helps crews stage rolls at machines, reducing interruptions during edging runs when this specific part number is scheduled into production.
This Rehau, Inc. product is categorized as edgebanding, positioning it for use on cabinet, casework, or similar panel-based projects where exposed substrate edges need covering. The 15/16 x 1.2mm ABS profile makes it suited to panel constructions that match this coverage range, so layouts can be designed around this dimension. Because the web description and SAP description both reference the same 315608-276 identification, shops can tie drawings, work orders, and materials lists directly to this specific banding. Using a consistent part number across projects helps maintain the same edge appearance from one production run to the next.
The ABS LE CP40966 EMB LAC wording in the SAP description indicates a defined design and surface code, so this banding aligns with matching specifications wherever that code is called out. When panels or fronts are specified to coordinate with CP40966 EMB LAC, this banding part number can be assigned to exposed edges to support that design intent. The 600FT length reference helps planners allocate one or more rolls against job quantities, simplifying ordering when multiple cabinet banks or room sets share this same edging selection. As part of the edge banding product class, this material can be scheduled into edging stations as a standard item in recurring shop workflows.
The defined 15/16 width listed in the SAP description supports repeatable set-ups on edgebanders, since operators can dial equipment to one known size whenever 315608-276 is on the machine. The 1.2mm thickness creates a consistent edge presence, allowing finishing teams to expect similar trimming and flushing behavior from piece to piece. Having the manufacturer part number 315608-276 linked directly to Rehau ABS Edgebanding gives purchasing and production a clear reference, which reduces mix-ups between different edge banding sizes or designs in shared storage racks.
The ABS LE CP40966 EMB LAC code provides a specific reference that can be written into project specifications, so designers, engineers, and shop staff all refer to the same surface and appearance when calling out this banding. The 600FT length designation supports planning for continuous runs along long cabinet lines or multiple units, which can reduce the number of roll changes during edging operations. Together, these defined attributes let teams treat this edge banding as a repeatable, documented component in their standard cabinet or panel workflows.
Rehau ABS edgebanding 315608-276 is specified in the SAP description as 15/16 x 1.2mm, giving coverage suited to standard panel thicknesses with room for trimming to a flush edge.
The ABS LE CP40966 EMB LAC wording identifies a specific decorative and surface combination, so projects calling for that code can match this banding to the intended design.
The SAP description states 600FT, giving a defined roll length that supports planning for the number of cabinets or panels that can be edged from each roll.
Rehau 315608-276 is categorized as Edge Banding, so it is intended for finishing and covering exposed edges on panel-based woodworking and cabinet projects.
The product name lists the brand as Rehau, Inc., so 315608-276 is an ABS edgebanding product from Rehau for use in woodworking applications.
The manufacturer part number 315608-276 uniquely identifies this Rehau ABS edgebanding, allowing drawings, orders, and production notes to reference one consistent edging material.
Rehau ABS edgebanding 315608-276 provides a documented 15/16 x 1.2mm ABS profile with the ABS LE CP40966 EMB LAC design code and a 600FT length reference. When projects specify this part number, shops can align edge-processing setups, material planning, and visual design intent around one defined banding choice for cabinet and panel runs.
Sold In: 1 Roll