Rehau ABS edgebanding 315608-303 is an ABS edge banding that finishes exposed panel edges with a consistent surface, which helps cabinets and casework present a uniform, professional look across runs. The 15/16 inch nominal width covers common 3/4 inch panels with margin for trimming, so installers can flush the edge cleanly after bonding. The 1.2mm thickness gives a solid edge profile, which supports a defined radius when trimmed and helps resist everyday edge impact in typical shop-built furniture. The CP41154 embossed lacquer finish provides a textured, lacquered surface, which allows the edge to visually coordinate with matching decorative faces using the same CP41154 reference. The 600ft length supplies a continuous run of material, which reduces mid-job splices on longer cabinet banks or multiple identical units.
The 15/16 inch wide profile of this Rehau ABS edge banding spans past the faces of standard panel thicknesses, which gives edgebanders and hand-applied setups enough material to trim flush without risking a short edge. The 1.2mm thickness runs consistently along the length, which supports predictable setup on automatic machines that depend on uniform material for clean trimming, scraping, and buffing. The CP41154 embossed lacquer finish is applied across the roll, which allows installers to maintain the same surface appearance from cabinet to cabinet when projects call for matching CP41154 edges. The 600ft length offers extended running time between roll changes, which can help maintain machine settings and workflow rhythm across multiple cabinet components.
This Rehau, Inc. ABS edgebanding sits in the edge banding class, which positions it for use on cabinetry, furniture components, and other panel-based assemblies handled by woodworking shops. The 15/16 inch width paired with 1.2mm thickness suits applications where panels need a substantial edge, which is common on cabinet doors, drawer fronts, and exposed carcass sides that see regular contact. The CP41154 embossed lacquer designation ties the edge surface to a specific décor reference, which is valuable when projects are specified around CP41154 surfaces and require matching edges on all visible sides.
The 600ft roll length aligns with runs where multiple parts share the same edge detail, which supports batching of components through an edgebander using a single material setup. The ABS construction keeps the banding within the common family of thermoplastic edges used in modern shops, which allows it to sit alongside other ABS-based programs in a material library for repeat use.
The defined size of 15/16 x 1.2mm gives installers a stable starting point for machine parameters, which simplifies dialing in trimming, scraping, and flush routing on equipment set up for 1mm-class edges. That same thickness helps create a consistent edge reveal, which supports uniform visual lines across cabinet rows and stacked components. The CP41154 embossed lacquer surface remains consistent along the 600ft length, which reduces visual transitions between parts when every exposed edge is banded with this same roll.
The Rehau ABS identity and manufacturer part number 315608-303 identify the exact material, which assists shops that track edgebanding by part number for future reorders or to match prior projects. Because this product sits in the edgebanding category from Wurth Baer Supply, it integrates naturally into broader woodworking material orders, which can streamline material sourcing when cabinets, laminates, and related supplies follow the same CP41154 design direction.
Rehau ABS edgebanding 315608-303 is 15/16 inch wide and 1.2mm thick, which supports coverage of standard 3/4 inch panels with extra material for trimming to a clean, flush edge.
The CP41154 embossed lacquer finish gives the ABS edgebanding a textured, lacquered surface, which helps it visually align with panels or components specified with the same CP41154 décor code.
The 1.2mm thickness creates a solid edge profile, which supports durable trimming and a defined edge radius on cabinet doors, drawer fronts, and other frequently handled components.
The 15/16 inch width extends beyond typical 3/4 inch substrates, which allows both faces to be trimmed back to a centered, fully covered edge without leaving the core exposed.
The 600ft length supports long production runs or multiple cabinet jobs with the same edge detail, which reduces roll changes and helps maintain consistent edgebander setup.
Rehau ABS edgebanding 315608-303 is supplied by Wurth Baer Supply, which positions it within a broader range of woodworking materials and cabinet-related products.
The Rehau ABS edgebanding 315608-303 combines 15/16 inch width, 1.2mm thickness, and a CP41154 embossed lacquer finish, which suits projects built around that décor. The 600ft roll length supports both production and custom shop runs using the same edge detail. For jobs calling for ABS edge banding coordinated to CP41154 surfaces, this specific 315608-303 part number from Rehau, Inc. offers a defined, repeatable option sourced through Wurth Baer Supply.
Sold In: 1 Roll