Rehau ABS edgebanding 315608-324 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so they match the laminated surface, giving cabinets and casework a consistent, professional look along every run. The 15/16 inch width covers standard panel thickness with room for trimming, which helps installers flush the edge after bonding without exposing the core. The 1.2mm thickness provides a solid edge profile that stands up to routine shop handling and daily use on finished pieces. The ABS material gives a uniform surface for bonding to typical woodworking substrates, supporting reliable adhesion along straight edges. The LE CP40728 EMB LAC description ties this banding to a specific decorative and lacquered look, so edges visually coordinate with the intended surface design. Supplied in a 600ft length, it supports longer production runs and repeat jobs using the same color and specification.
This Rehau ABS edgebanding is sized at 15/16 inch by 1.2mm, giving fabricators working room when applying to standard panel edges while still trimming back to a clean line. That extra width simplifies aligning the strip on both faces before trimming, which supports repeatable edges across multiple panels. The 1.2mm gauge runs well through typical edge-banding and trimming equipment, helping maintain a stable feed and controlled cut. The 600ft length allows you to set up once for a run of panels while staying in the same color and specification, which supports consistent results from the first cabinet to the last on a project.
The Rehau ABS edgebanding, listed under SAP description 15/16X1.2MM ABS LE CP40728 EMB LAC 600FT, is suited for edging laminated wood-based panels in cabinet and casework construction. Its classification as Edge Banding in the Edgebanding category places it squarely in panel finishing roles, from kitchen and bath cabinets to commercial fixtures using matching surfaces. The 15/16 inch width aligns with panels where the edge needs full coverage with a margin for trimming, helping conceal the substrate at doors, drawer fronts, and carcass edges. The LE CP40728 EMB LAC designation associates this banding with a specific decorative look, supporting projects that rely on coordinated panel and edge design within a defined color or texture program.
The combination of 15/16 inch width and 1.2mm thickness gives installers a working balance between coverage and handling, which directly affects how cleanly edges finish after trimming. The slightly oversized width means the banding can be positioned without precision to the thousandth, then brought flush on both faces, reducing visible misalignment on finished cabinet runs. The 1.2mm thickness provides enough material for controlled trimming and scraping without feeling overly bulky on doors and panels, which helps maintain a refined appearance along the edge line. Being ABS edge banding from Rehau, Inc., the product is designed as a dedicated panel edging solution, so it integrates naturally into woodworking shops that standardize on ABS for their laminated components. The 600ft coil length concentrates this specification into a single run, supporting color consistency and repeatability across large or phased projects using the same SAP and manufacturer part numbers.
Rehau ABS edgebanding 315608-324 is described as 15/16X1.2MM, giving a 15/16 inch width and 1.2mm thickness, which supports full edge coverage with room for trimming on typical panel work.
This product is ABS edge banding, so the edge is formed from ABS material, giving a consistent, machinable surface for trimming and finishing on cabinet and casework projects.
Rehau ABS edgebanding 315608-324 is specified at 600ft, supporting extended runs or multiple jobs while staying with the same color, texture, and specification.
The LE CP40728 EMB LAC description identifies a specific decorative and lacquered look, helping align this ABS edgebanding with matching surfaces in a coordinated design program.
The 1.2mm thickness on this ABS edgebanding provides a solid edge profile that trims cleanly and offers a substantial feel on doors, drawer fronts, and panel edges.
Rehau ABS edgebanding 315608-324 finishes exposed panel edges so cabinets and casework match their laminated surfaces, giving a unified appearance across the installation.
Choose Rehau ABS edgebanding 315608-324 when you need 15/16 inch by 1.2mm ABS edge banding in the LE CP40728 EMB LAC specification to align panel edges with a defined decorative surface. The 600ft length supports project continuity, so casework, doors, and fronts share a consistent finished edge across the job.
Sold In: 1 Roll